IP Address | Assign an IP address for the LAN interface. |
Subnet Mask | Assign the subnet mask for the LAN interface. |
Status | Click Enable to use DHCP server; click Disable to close |
| DHCP server; click Relay Agent to activate relay agent |
| function. |
Start IP | Assign the start IP address of the IP pool that DHCP server can |
| use for clients in LAN. |
End IP | Assign the end IP address of the IP pool that DHCP sever can |
| use for clients in LAN. |
Primary DNS | Type the IP address for primary DNS. |
When you finished the above required settings, please click Finish. A system reboot page will appear. Click Apply to activate the static mode configuration.
16 | Vigor3300 Series User’s Guide |
