Timeout | several seconds but not finish the complete dialing. The |
| system will force to dial the incomplete number after the time |
| you set in this field to finish that call. For example, the phone |
| number is 03654321 and the dialing completion timeout is set |
| to 4 (secs). The user dials with 036 and stops to dial. After |
| passing through 4 seconds, the router will send out that phone |
| call automatically. |
VoIP ToS | The ToS value in VoIP protocol packet. The default setting is |
| 0xa0. |
Line Polarity Reversal as | Check this box to generate line polarity reversal while the |
Callee Answer | remote user picks up the phone call. |
FXO auto disconnection if | Determine the time length for the FXO disconnecting |
no packet is received in X | automatically when there is no packet received. |
minutes |
|
Ringing Frequency | Please select a proper setting as the ringing frequency. |
Ringing Cadence - On | Determines the length of the ringing time for incoming calls. |
Ringing Cadence - Off | Determines the length for the incoming calls to stop ringing. |
3.7.6 Tone Settings
This setting is provided for fitting the telecommunication custom for the local area of the router installed. Wrong tone settings might cause inconvenience for users. To set the sound pattern of the phone set, simply choose a proper region to let the system find out the preset tone settings and caller ID type automatically. Or you can adjust tone settings manually if you choose User Defined. TOn1, TOff1, TOn2 and TOff2 mean the cadence of the tone pattern. TOn1 and TOn2 represent
Vigor3300 Series User’s Guide | 117 |
