2.2.2 Static Mode
You can manually assign a static IP address to the WAN interface and complete the configuration by applying the settings and rebooting your router. Choosing Static as the IP mode, you will see the following page:
All the settings here are set by privately. Your ISP will not provide these settings.
IP Address | Assign a private IP address to the WAN interface. |
Subnet Mask | Assign a subnet mask value to the WAN interface. |
Default Gateway | Assign a private IP address to the gateway. |
Primary DNS | Assign a private IP address to the primary DNS. |
Secondary DNS | Assign a private IP address to the secondary DNS. |
IP Alias List | Assign other IP addresses to be bound to this interface. This |
| setting is optional. If you have typed addresses here, you can |
| see and choose it in later web page settings (e.g., Advanced >> |
| NAT>>Port Redirection/DMZ Host). |
| settings are allowed at one time. |
After setting up the WAN interface, the user can click Next to setup the LAN interface continuously.
Vigor3300 Series User’s Guide | 15 |
