IP Mode

Sets an IP Mode with Static (fixed IP), DHCP (dynamic IP

 

address), PPPoE, PPTP or DMZ and creates the IP group

 

information. Most cable modem users will use DHCP to get a

 

globally reachable IP address from the cable head-end system.

 

Different mode will lead different configuration and will be

 

explained in later section.

Before you connect a broadband access device e.g. a DSL/Cable modem to Vigor3300 Series, you need to know what kind of Internet access your ISP provides. The following sections introduce four widely used broadband access services: Static, PPPoE, PPTP for DSL, DHCP for Cable modem and DMZ. In most cases, you will get a DSL or cable modem from the broadband access service provider. Vigor3300 Series is connected behind the broadband device i.e. DSL/cable modem and works as a NAT or IP router for broadband connections.

Next, we will introduce each WAN mode in detailed.

Static IP Setup

It means that the IP group information for WAN interface is manually assigned by the user.

IP Address

Sets the private IP address of WAN interface.

Subnet Mask

Sets the subnet mask value of WAN interface.

Default Gateway

Sets the private IP address of gateway.

Primary DNS

Sets the private IP address of primary DNS.

Secondary DNS

Sets the private IP address of secondary DNS.

Vigor3300 Series User’s Guide

39

Page 43
Image 43
Epson 3300 manual Static IP Setup, IP Address