Epson 3300 Radius Setup, Common Ports List, Alias addresses, Configured in Network WAN interface

Use IP Alias	Disable option uses WAN interface, Enable option uses IP
	Alias addresses.
IP Alias	Select an IP address which are set within the list of IP Alias
	configured in Network >>WAN interface.
Apply	Click Apply to reboot the system and apply the settings.

Common Ports List

This page lists common ports used in Internet. The information includes service/application, protocol for that service and port number of that service.

3.3.3 RADIUS Setup

A RADIUS (Remote Authentication Dial-In User Service) is a security authentication client/server protocol widely used by Internet service providers on other remote access service. A RADIUS is the most common means of authenticating and authorizing dial-up and tunneled network users. The built-in RADIUS client function allows you to extend the remote dial-in user accounts to the RADIUS server. Your user accounts will not be limited by built-in accounts (in VPN>>PPTP>>User Profile). It also lets you centralize remote access authentication for network management.

Radius is a server for remote user authentication and accounting. Its primary use is for Internet Service Providers, though it may as well be used on any network that needs a centralized authentication and/or accounting service. A Radius supports a wide variety of authentication schemes. A user supplies his authentication data to the server either directly by answering the terminal server’s login/password prompts, or using PAP of CHAP protocols.

The Vigor 3300 Series support Radius client function. A user can configure some authentication information to do an authentication with Radius server. In Vigor3300 Series, it

is only applied by VPN->PPTP function.

In the Advanced group, click the Radius option. You will get the following page.

60 Vigor3300 Series User’s Guide