2.2.3 DHCP Mode
DHCP allows a user to obtain an IP address automatically from a DHCP server on the Internet. If you choose DHCP mode, the DHCP server of your ISP will assign a dynamic IP address for Vigor3300 automatically. It is not necessary for you to assign any setting. (Host Name and Domain Name are required for some ISPs). Simply click Next to setup LAN interface.
After setting up the WAN interface, the user can click Next to setup the LAN interface continuously.
IP Address | Assign an IP address for the LAN interface. |
Subnet Mask | Assign the subnet mask for the LAN interface. |
Status | Click Enable to use DHCP server; click Disable to close |
| DHCP server; click Relay Agent to activate relay agent |
| function. |
Start IP | Assign the start IP address of the IP pool that DHCP server can |
| use for clients in LAN. |
Vigor3300 Series User’s Guide | 17 |
