Connecter Specification | Epson 3300 instruction


LED	Status	Explanation

FDX On

Off

It means a full duplex connection on corresponding port.

It means a half duplex connection on corresponding port.


Interface	Description
Console	Provided for technician use.
LAN (P1 ~ P4)	Connecter for local networked devices.
WAN1 ~ WAN3	Connecter for remote networked devices.

Connecter Specification

Auxiliary	Type,	Connected to		Remarks
Auxiliary	Type,	Connected to		Remarks
Cables	Color

Power Cord	Black	AC Outlet		90-264VAC

Serial (Console)	RS232, Grey	PC RS232 port		--

Ethernet (LAN)	RJ-45, Blue	Ethernet switch or hub		--

Ethernet (DMZ)	RJ-45, Blue	Server

Ethernet (WAN1)	RJ-45, Blue	DSL/Cable/Fiber Modem		--

Ethernet (WAN2)	RJ-45, Blue	DSL/Cable/Fiber Modem

Ethernet (WAN3)	RJ-45, Blue	DSL/Cable/Fiber Modem

Ethernet (WAN4)	RJ-45, Blue	DSL/Cable/Fiber Modem

Vigor3300 Series User’s Guide

7

Image 11

Epson 3300 manual Connecter Specification, Auxiliary Type Connected to Remarks Cables Color

Contents

Vigor 3300 Series Declarations Copyright Information Table of Contents Appendix a Application for 802.1 Vlan 137 Trouble Shooting 127 Preface Factory Reset LED Indicators and ConnectionLED Indicators and Connectors for Vigor3300V Interface Description WAN LED Indicators and Connectors for Vigor3300 WAN/DMZ WAN1 ~ WAN3 LED Indicators and Connectors for Vigor3300B+ Auxiliary Type Connected to Remarks Cables Color Connecter Specification Hardware Installation Chassis Connections Detailed Explanation for the ConnectorRS232 Connector Standard 10/100 Base-T Ethernet Interface Connector Desktop Type Installation Changing Password Configuring Basic Settings Vigor3300 Series User’s Guide Adjusting WAN Connection Mode Quick Setup Physical Mode Static Mode End IP StatusStart IP Dhcp Mode Primary DNS Type the IP address for primary DNS Default value is PAPPPPoE Use for clients in LAN Primary DNS Pptp IP Address Status, and WAN Status System setupStatus LAN Status Basic Status TX Packets High Available StatusRX Packets WAN Status Time Syslog Server Port SyslogSyslog Server IP Access Control Push Backup Button File name is v3300.cfg Configuration Setup Firmware Upgrade from a Console Port Firmware Upgrade Setup Tftp -i 192.168.1.1 PUT Vigor3300 image file name Vigor3300 Series User’s Guide Reboot Interface Diagnostic ToolsDestination Flag s Time Left Assigned IP Vigor3300 Series User’s Guide Load Balance Network SetupWAN and Internet Access Setup Backup Backup-Master IP ModeDefault Route Weight Static IP Setup Detect Type ResetHost Name Domain Name Request supported in the router Dhcp Client Setup Detect Interval PPPoE with a DSL Modem SetupService Name User Name Pptp Remote Address Pptp with a DSL Modem SetupPptp Local Address Pptp Subnet Mask For LAN IP/DHCP 2 LAN WAN Interface For Dhcp Relay Agent LAN Interface For IP Routing Dest Port End Load Balance PolicyProtocol Dest Port Start Dest IP/Subnet Mask High AvailabilityDelete/Delete All Source IP/Subnet Mask Vigor3300 Series User’s Guide Role Static DhcpHigh Availability Group Number Advanced Setup Edit the Static Route Static Route Setup Destination IP Delete the Static RouteLAN , and WAN1~WAN4 Port Redirection NAT Setup Comment IP Alias Public Port RangePrivate Port Range Use IP Alias Address Mapping DMZ Host Display the WAN interface chosen for this entry Alias addresses Radius SetupConfigured in Network WAN interface Common Ports List Shared Secret Enable/DisableServer IP Address Destination Port Port Number Ddns SetupPort Block Index Interface should be any WAN port on V3300 series Server Provider Login NameLogin Password Backup MX Edit Call Schedule Call Schedule Setup Select some weekdays to apply Delete Call ScheduleUp means to activate the Network Interface Mirrored Ports WAN Port Mirroring SetupMirroring Port LAN Vlan Setup LAN Port Mirroring Setup Vlan 0 For Port Base VlanP1 P4 Member For 802.1Q VlanName Port Valn ID SnmpFrame Tag Operation Host/mask Max AccessSnmp Community Community Vigor3300 Series User’s Guide Trap server port Snmp TrapsTrap Server Trap Community Vigor3300 Series User’s Guide IP Filter Firewall SetupGeneral Setup Group Table Delete Source Port Fragments End PortDestination Mask Direction Further match or Pass if no further match of Block or Pass 2 DoS Defense Value is DisableEnable Icmp Flood DoS Defense URL Filter SurfControl, Restrict Web Feature and Filter Schedule URL Access Control SurfControl Restrict Web Feature Filter Schedule Block only at Quality of Service SetupAlways Block Vigor3300 Series User’s Guide Class Name Incoming/Outgoing Class SetupDisable/Enable Incoming/Outgoing Class Filter Class Service Type StatusPriority Advanced Only the DiffServ CodePoint field can be PortDiffServ CodePoint Status Basic Only the DiffServ CodePoint Type field can be VPN and Remote Access Setup Delete All ConfigurationIPSec Policy Table Profile Status For Default Configuration Security Gateway For Advanced ConfigurationSecurity Protocol Local Certificate Vigor3300 Series User’s Guide Timeout Delay Date/Time LogTrust CA Import User CertificateGenerate Download Email Certificated by email address Certification Name Name of the certification entry ID TypeDomain Name Certificated by domain name IP Certificated by IP address 102 Status Pptp Encryption Pptp AuthenticationUser Authentication Group AuthenticationUser Password 192.168.1.224/28 Type username, password and choose proper group for this Protocol VoIP Setup For SIP Configuration For Mgcp Configuration For Phone Number Port Settings Hotline Port 1 FXS FXO Codec VAD Enable or Disable VAD Voice Activity Call forwarding no answer after Range 1~10 rings Dtmf ModeFor Group Call Forwarding Speed Dial Append Advanced Speed DialPrefix Strip Length Dialing Completion MiscellaneousStarting Port Redundancy Number Tone Settings Caller ID Type Region Interleaving Enable7 QoS Link Fragmentation Address Semi-auto, need to config NAT If you click this functionNAT Traversal Manually Input NAT IP Set Incoming Call Barring Deny List Allow List Call History Codec Type Remote RTP AddressRemote RTP Port RTP Statistic 125 126 Checking If the Hardware Status Is OK or Not Trouble Shooting For Windows 129 For MacOs For MacOs Terminal Pinging the Router from Your Computer For PPPoE Mode Checking If the ISP Settings Are OK or Not For Static Mode For Dhcp Mode Software Reset Backing to Factory Default Setting If NecessaryFor Pptp Mode Contacting Your Dealer Hardware Reset Block LAN-to-LAN Communication Appendix a Application for 802.1 Vlan How to Check/Edit Vlan ID on Your PC? 139 140 141 142 143 144 Four VLANs for Different Departments in a Company ProcedureApplications 146 Two VLANs for Different Departments in a Company 148 Example for the Companies in the Same Building 150 Example for a Company and Guest 152 Example for Trunk Usage 154