
3.1.4 Access Control
This page allows you to determine which services (HTTP/Telnet/SSH) is used for the user to access Vigor3300 Series. In addition, you can also limit some hosts to access Vigor3300 Series with specified IP address.
In the System group, click the Access Control option. You will get the following page:
Management Method | There are three management methods provided here for you to |
| choose for your router. Check HTTP/Telnet/SSH for the router. |
Allow Management from | Disable - Disable the management from the WAN interface. |
the WAN | Enable All - Enable all management (through |
| HTTP/Telnet/SSH) from the WAN interface. |
| Enable User Defined WAN IP - System can be managed by |
| these three IP addresses via WAN. |
| Allowed IP1(to 3) - Type in IP address (up to three) for |
| managing the system. |
Management Port | Default Ports - Use the default ports for HTTP and Telnet if |
| you choose HTTP and Telnet as management methods. |
28 | Vigor3300 Series User’s Guide |