Hardware Installation | Epson 3300 specification

1.2 Hardware Installation

Before starting to configure the router, you have to connect your devices correctly.

1.Connect the power cord to the power port of Vigor3300 router on the rear panel, and the other side into a wall outlet.

2.Power on the device by pressing the power switch on the rear panel. The PWR LED should be ON.

3.The system starts to initiate. After completing the system test, the ACT LED will light up and start blinking.

4.Connect one end of an Ethernet cable (RJ-45) to one of the LAN ports of Vigor3300.

5.Connect the other end of the cable (RJ-45) to the Ethernet port on your computer (that device also can connect to other computers to form a small area network). The LAN LED for that port on the front panel will light up.

6.Connect a server/modem/router (depends on your requirement) to any available WAN port of the device with Ethernet cable (RJ-45). The WAN LED will light up.

7.Connect telephone sets to the FXS ports of Vigor3300V with telephone lines (RJ-11 to RJ-11). For the users of Vigor3300 and Vigor3300B+, please skip this step.

8.Connect the FXO ports to PABX with telephone lines (RJ-11 to RJ-11). For the users of Vigor3300 and Vigor3300B+, please skip this step.

Below shows an outline of the hardware installation for your reference (take Vigor3300V as an example).

8	Vigor3300 Series User’s Guide

Image 12

Epson 3300 manual Hardware Installation

Contents

Vigor 3300 Series Copyright Information Declarations Table of Contents Trouble Shooting 127 Appendix a Application for 802.1 Vlan 137 Preface LED Indicators and Connection LED Indicators and Connectors for Vigor3300VFactory Reset Interface Description LED Indicators and Connectors for Vigor3300 WAN WAN/DMZ WAN1 ~ WAN3 LED Indicators and Connectors for Vigor3300B+ Connecter Specification Auxiliary Type Connected to Remarks Cables Color Hardware Installation Detailed Explanation for the Connector RS232 ConnectorStandard 10/100 Base-T Ethernet Interface Connector Chassis Connections Desktop Type Installation Configuring Basic Settings Changing Password Vigor3300 Series User’s Guide Quick Setup Adjusting WAN Connection Mode Physical Mode Static Mode Status Start IPEnd IP Dhcp Mode Default value is PAP PPPoEUse for clients in LAN Primary DNS Type the IP address for primary DNS Primary DNS Pptp IP Address System setup StatusStatus, and WAN Status Basic Status LAN Status High Available Status RX PacketsTX Packets WAN Status Time Syslog Syslog Server IPSyslog Server Port Access Control Configuration Setup Push Backup Button File name is v3300.cfg Firmware Upgrade Setup Firmware Upgrade from a Console Port Tftp -i 192.168.1.1 PUT Vigor3300 image file name Vigor3300 Series User’s Guide Reboot Diagnostic Tools DestinationFlag s Interface Assigned IP Time Left Vigor3300 Series User’s Guide Network Setup WAN and Internet Access SetupBackup Load Balance IP Mode Default RouteWeight Backup-Master Static IP Setup Reset Host NameDomain Name Detect Type Dhcp Client Setup Request supported in the router PPPoE with a DSL Modem Setup Service NameUser Name Detect Interval Pptp with a DSL Modem Setup Pptp Local AddressPptp Subnet Mask Pptp Remote Address 2 LAN For LAN IP/DHCP For Dhcp Relay Agent WAN Interface For IP Routing LAN Interface Load Balance Policy ProtocolDest Port Start Dest Port End High Availability Delete/Delete AllSource IP/Subnet Mask Dest IP/Subnet Mask Vigor3300 Series User’s Guide Static Dhcp High AvailabilityGroup Number Role Advanced Setup Static Route Setup Edit the Static Route Delete the Static Route LAN , and WAN1~WAN4Destination IP NAT Setup Port Redirection Comment Public Port Range Private Port RangeUse IP Alias IP Alias Address Mapping DMZ Host Display the WAN interface chosen for this entry Radius Setup Configured in Network WAN interfaceCommon Ports List Alias addresses Enable/Disable Server IP AddressDestination Port Shared Secret Ddns Setup Port BlockIndex Port Number Interface should be any WAN port on V3300 series Login Name Login PasswordBackup MX Server Provider Call Schedule Setup Edit Call Schedule Delete Call Schedule Up means to activate the Network InterfaceSelect some weekdays to apply WAN Port Mirroring Setup Mirroring PortMirrored Ports LAN Port Mirroring Setup LAN Vlan Setup For Port Base Vlan P1 P4Vlan 0 For 802.1Q Vlan NameMember Snmp Frame Tag OperationPort Valn ID Max Access Snmp CommunityCommunity Host/mask Vigor3300 Series User’s Guide Snmp Traps Trap ServerTrap Community Trap server port Vigor3300 Series User’s Guide Firewall Setup General SetupIP Filter Group Table Delete Source Port End Port Destination MaskDirection Fragments 2 DoS Further match or Pass if no further match of Block or Pass Value is Disable Enable Icmp FloodDoS Defense Defense URL Filter URL Access Control SurfControl, Restrict Web Feature and Filter Schedule SurfControl Restrict Web Feature Filter Schedule Quality of Service Setup Always BlockBlock only at Vigor3300 Series User’s Guide Incoming/Outgoing Class Setup Disable/EnableIncoming/Outgoing Class Filter Class Name Service Type Status PriorityClass Port DiffServ CodePoint StatusBasic Only the DiffServ CodePoint Type field can be Advanced Only the DiffServ CodePoint field can be VPN and Remote Access Setup Configuration IPSecPolicy Table Delete All For Default Configuration Profile Status For Advanced Configuration Security ProtocolLocal Certificate Security Gateway Vigor3300 Series User’s Guide Delay Timeout Log Trust CADate/Time User Certificate GenerateDownload Import Certification Name Name of the certification entry ID Type Domain Name Certificated by domain nameIP Certificated by IP address Email Certificated by email address 102 Status Pptp Authentication User AuthenticationPptp Encryption Authentication User Password192.168.1.224/28 Group Type username, password and choose proper group for this VoIP Setup Protocol For SIP Configuration For Mgcp Configuration Port Settings For Phone Number Port 1 FXS Hotline Codec VAD Enable or Disable VAD Voice Activity FXO Dtmf Mode For GroupCall Forwarding Call forwarding no answer after Range 1~10 rings Speed Dial Advanced Speed Dial PrefixStrip Length Append Miscellaneous Starting PortRedundancy Number Dialing Completion Tone Settings Region Caller ID Type Enable 7 QoSLink Fragmentation Interleaving Semi-auto, need to config NAT If you click this function NAT TraversalManually Input NAT IP Address Incoming Call Barring Set Allow List Deny List Call History Remote RTP Address Remote RTP PortRTP Statistic Codec Type 125 126 Trouble Shooting Checking If the Hardware Status Is OK or Not For Windows 129 For MacOs Pinging the Router from Your Computer For MacOs Terminal Checking If the ISP Settings Are OK or Not For PPPoE Mode For Static Mode For Dhcp Mode Backing to Factory Default Setting If Necessary For Pptp ModeSoftware Reset Hardware Reset Contacting Your Dealer Appendix a Application for 802.1 Vlan Block LAN-to-LAN Communication How to Check/Edit Vlan ID on Your PC? 139 140 141 142 143 144 Procedure ApplicationsFour VLANs for Different Departments in a Company 146 Two VLANs for Different Departments in a Company 148 Example for the Companies in the Same Building 150 Example for a Company and Guest 152 Example for Trunk Usage 154