Epson 3300 manual Address Mapping

Address Mapping

If you have a group of static IP addresses, then you can use the address-mapping feature to multiple open ports hosts in the Vigor3300 Series of broadband security routers. The following session will show you how to setup address-mapping feature.

In the Advanced group, move to NAT option and choose Address Mapping to get the corresponding page.

Protocol	Display the protocol used for this address mapping.
Public IP	Display the public IP address selected for this entry.
Private IP	Display the private IP set for this address mapping.
Mask	Display the subnet mask selected fro this address mapping.
Edit	Allow users to edit the selected address mapping settings.
Delete/Delete All	Remove one/all the selected address mapping settings.

To edit an item, click the radio button of the item that you want to modify. Then click Edit on the bottom of the page to add a new rule entry or modify an existed rule entry.

Vigor3300 Series User’s Guide 57