Epson 3300 manual Dhcp Client Setup, Request supported in the router

DHCP Client Setup

If the WAN interface is set as a DHCP client, the Vigor3300 Series will ask for IP network settings from the DHCP server or DSL modem automatically. It is not necessary for users to manually configure the router.

Detect Type	Select a detecting type for this WAN interface. There are three
	ways Send ARP to Gateway, Send PING and Send HTTP
	Request supported in the router.

Detect Interval (sec)	Assign an interval period of time for each detecting. The
	minimum value is 3 and no limit for maximum value.
No-Reply Count	Assign detecting times to ensure the connection of the WAN.
	After passing the times you set in this field and no reply
	received by the router, the connection of WAN interface will be
	regarded as breaking down.
Detect Destination Host	Assign an IP address or Domain name as a destination to be
(IP or Domain Name)	detected whether the host is active (sending reply to the
	router) or not. If not, the connection of WAN interface will be
	regarded as breaking down. This function is available when
	Detect Type is set with Send PING or Send Http Request.

Vigor3300 Series User’s Guide 41