Page 12 | AXIS 209FD/FD-R/FD-R M12/MFD/MFD-R/MFD-R M12 Installation Guide |
Complete the installation
1.Clean the dome with a dry soft cloth to remove dust and fingerprints and use a blower to remove any dust from the lens.
2. To absorb any moisture in the | Affix dry bag here. |
AXIS 209FD-R/AXIS 209FD-R | |
M12/AXIS 209MFD-R/AXIS | |
209MFD-R M12, remove the | |
supplied silica gel sachet (dry | |
bag) from the plastic bag and | |
affix inside the cover, behind | |
the dome. | |
3.You can replace the cover in either of these two ways:
•Replace cover and gently tighten the tamper-proof screws by hand using the supplied allen key. In
the AXIS 209FD-R/AXIS 209FD-R M12/AXIS 209MFD-R/AXIS 209MFD-R M12, take care not to pinch the gasket.
•Replace cover and tighten the tamper-proof screws with torque screwdriver (torque<0.4 Nm).
The installation is now complete.
Accessing the AXIS 209FD/FD-R/FD-R M12/MFD/MFD-R/ MFD-R M12 from the Internet
Once installed, your AXIS 209FD/FD-R/FD-R M12/MFD/MFD-R/MFD-R M12 is accessible on your local network (LAN). To access the camera from the Internet, network routers must be configured to allow incoming traffic, which is usually done on a specific port. Please refer to the documentation for your router for further instructions. For more information on this and other topics, visit the Axis Support Web at www.axis.com/techsup