Axis Communications AXIS M1144-L user manual Add Recipients, Actions, Recipient Types

Page 33

AXIS M1144–L Network Camera

Events

Actions

Available actions include:

IR Illumination – Activate or deactivate IR light.

Day/Night Vision Mode – Set day mode (IR cut filter on) or night mode (IR cut filter off).

Output Port – Activate an I/O port to control an external device.

Overlay Text – Display an overlay text. See Use Overlay Text in an Action Rule on page 21.

PTZ Control

-Preset Position – Go to a preset position.

-Guard Tour – Start a guard tour. See Guard Tour on page 24.

Record Video – Record video to a selected storage.

Send Images – Send images to a recipient.

Send Notifications – Send a notification message to a recipient.

Send SNMP Trap – Send an SNMP trap message to the operator. Make sure that SNMP is enabled and configured under System Options > Network > SNMP.

Send Video Clip – Send a video clip to a recipient.

Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during product installation and configuration.

Add Recipients

The product can send media files and messages to notify users about events. Before the product can send media files or notification messages, you must define one ore more recipients. For information about available options, see Recipient Types on page 33.

To add a recipient:

1.Go to Events > Recipients and click Add.

2.Enter a descriptive name.

3.Select a recipient Type.

4.Enter the information needed for the recipient type.

5.Click Test to test the connection to the recipient.

6.Click OK.

Recipient Types

The following recipients are available:

Recipient

Use with action

Notes

 

 

 

Email

Send Images

An email recipient can contain multiple email addresses. For

 

Send Notification

more information about email recipients, see Set Up Email

 

Recipients on page 34

 

Send Video Clip

 

 

 

 

33

Image 33
Contents Axis M1144-L Network Camera Legal Considerations About this DocumentLiability Intellectual Property RightsLearn More SupportAxis M1144-L Network Camera Table of ContentsConnectors Performance Considerations Symptoms, Possible Causes and Remedial ActionsNetwork Connector Connectors and ButtonsConnector Hardware OverviewSD Card Slot LED IndicatorsControl Button Color IndicationAccess from a Browser Access the ProductAccess from the Internet Set the Root PasswordControls on the Live View Live ViewClick Use Https Manual TriggerAxis Media Control viewer toolbar Go to Setup EventsPTZ Controls To show the manual trigger buttons in the Live ViewAxis M1144-L Network Camera How to Stream H.264 Media StreamsAxis Media Control AMC QuickTimeTM. The following paths can be used Alternative Methods of Accessing the Video StreamAxis M1144-L Network Camera Basic Setup Set Up the ProductVideo Click Save to apply the new settingsVideo Stream Pixel Counter264 Stream ProfilesExposure Settings Camera SettingsImage Appearance White BalanceView Area To configure the view areaOverlay Built-in IR Illuminations LEDsGo to Video Overlay Image Overlay ImagePrivacy Mask Focus AdjustmentUse Overlay Text in an Action Rule Go to Events Action RulesDefault Viewer for Browsers Configure the Live ViewViewer Settings Browser Viewer DescriptionUser Defined Links Go to Setup Live View ConfigOutput Buttons For more information about I/O ports, see I/O Ports onPTZ Pan Tilt Zoom Preset PositionsGuard Tour AdvancedControl Queue Operator Same as administrator but with lower priorityCamera Tampering DetectorsMotion Detection Go to Detectors Camera TamperingMotion Detection Parameters Set Up Motion Detection WindowsAxis M1144-L Network Camera Go to Setup Applications Install ApplicationApplications Application LicensesAxis M1144-L Network Camera Events Set Up Action RulesTriggers Go to Events Action Rules and click AddHardware Input SignalStorage SystemAdd Recipients ActionsRecipient Types Set Up Email Recipients Create SchedulesGo to Events Schedules and click Add Go to Events Recurrences and click Add Set Up RecurrencesFind Recordings RecordingsPlay Recording Go to Recordings ListExport Video Clip Continuous RecordingGo to Recordings Continuous Languages Security System OptionsUsers IP Address FilterIeee CertificatesGo to System Options Security Ieee Go to Setup System Options Security Certificates Basic TCP/IP SettingsDate & Time NetworkIPv6 Address Configuration IPv4 Address ConfigurationAssign IP Address Using ARP/Ping ARP/PingAxis Internet Dynamic DNS Service Advanced TCP/IP SettingsAxis Internet Dynamic DNS Service requires IPv4 DNS ConfigurationHost Name Configuration NTP ConfigurationLink-Local IPv4 Address NAT traversal port mapping for IPv4FTP QoS Quality of ServiceUPnPTM UPnPTM can be disabled under System Options Network UPnPTMRTP/H.264 BonjourSD Card StorageMount and Unmount SD Card Format SD CardPorts & Devices MaintenanceNetwork Share PortsSupport Overview SupportSystem Overview Logs & ReportsPlain Config Reset to Factory Default SettingsScripting File UploadAxis M1144-L Network Camera Upgrade the Firmware TroubleshootingEmergency Recovery Procedure Check the FirmwareProblems setting the IP address Symptoms, Possible Causes and Remedial ActionsProduct cannot be accessed from a browser Product is accessible locally but not externallyStatus and Network indicator LEDs are flashing red rapidly Problems with streaming H.264Video and image problems, general Video Camera SettingsMotion Detection triggers unexpectedly Storage and disk management problemsTechnical Specifications Installation Function/group Specifications Event actionsMaintenance General Casing PowerConnectors Function Pin SpecificationsPerformance Considerations Axis M1144-L Network Camera M2.13