Bosch Appliances 7000 manual Maximum Retention Time

AutoDome 7000 Series (IP and HD) Configuration via IP, Advanced Mode en 113

Standard profile

From this field, you can select the encoder profile to be used for recording (see Encoder Profile, page 96).

Notice!

The recording profile can deviate from the standard setting Active profile and is only used during an active recording.

Pre-alarm time

You can select the required pre-alarm time from the list field.

Post-alarm time

You can select the required post-alarm time from the list field.

Post-alarm profile

You can select the encoder profile to be used for recording during the post-alarm time (see Encoder Profile, page 96).

The Standard profile option adopts the selection at the top of the page.

Alarm input / Analysis alarm / Video loss alarm

Here you can select the alarm sensor that is to trigger a recording.

Virtual alarm

Here you can select the virtual alarm sensors that are to trigger a recording, via RCP+ commands or alarm scripts, for example.

Notice!

For more information, please see the Alarm Task Script Language document and the RCP+ documentation. These documents can be found on the product CD supplied.

Recording includes

You can specify whether, in addition to video data and metadata (for example alarms, VCA data and serial data) should also be recorded. Including metadata could make subsequent searches of recordings easier but it requires additional memory capacity.

Caution!

!Without metadata, it is not possible to include video content analysis in recordings.

14.28Maximum Retention Time

You can specify the retention times for recordings. If the available memory capacity of a medium has been used, older recordings are only overwritten if the retention time entered here has expired.

Notice!

Make sure that the retention time corresponds with the available memory capacity. A rule of thumb for the memory requirement is as follows: 1 GB per hour retention time with 4CIF for complete frame rate and high image quality.

Maximum Retention Time

Enter the required retention time in hours or days for each recording. Recording 1 corresponds to Stream 1, Recording 2 corresponds to Stream 2.

Bosch Security Systems Operation Manual 2013.07 1.2.2 F.01U.283.679