Bosch Appliances 7000 manual Audio function, Aux Control Tab

Page 142

142 en Operation

AutoDome 7000 Series (IP and HD)

 

 

Events such as the triggering or end of alarms are shown in the Event Log field. You can save these messages automatically in a file (see the AUTODOME 7000 Series online help).

1.If you want to delete the entries, click the delete icon in the top right-hand corner of the relevant field.

2.If you want to view a detailed log, click the icon in the top right-hand corner of the relevant field. A new window will open.

Audio function

All users who are connected to the AUTODOME camera via Web browser can receive audio signals from the camera. Audio signals can only be sent to the camera by the user who connects to the unit first.

1.On the LIVEPAGE, click anywhere next to the video image to remove the focus from the ActiveX.

2.Hold down the F12 key to establish a voice connection to the camera. The browser’s status bar displays the message Send Audio ON.

3.Release the F12 key when you want to stop sending audio signals to the camera. The status bar displays the message Send Audio OFF.

Notice!

When the voice contact connection to the camera is broken, the next user to make a connection to the camera can send audio data to the camera.

Aux Control Tab

The Aux Control tab is used to enter pre-programmed keyboard control commands. These commands are composed of a command number plus the appropriate function key (Show Shot, Set Shot, Aux On, Aux Off). A valid combination either issues a command to the camera or displays an on-screen menu. (Refer to the User Command Table, page 158 for a list of all commands.)

Notice!

By default, the camera is configured for a total of 256 presets. You have the option of disabling the extended presets, and using only 99 presets, although this is not recommended. To disable extended presets, enter 151 on the keypad, and then click Aux On..

To access the Aux Control tab, navigate to the LIVEPAGE and click the Aux control tab.

2013.07 1.2.2 F.01U.283.679

Operation Manual

Bosch Security Systems

Image 142
Contents AutoDome 7000 Series IP and HD Page Table of contents Configuration via IP, Basic Mode ConfigurationConfiguration via IP, Advanced Mode 118 14.32 Alarm Connections 116 14.33VCA Operation 139Important Safety Instructions Safety ENSafety Precautions About this ManualAutoDome 7000 Series IP and HD Safety EN en Important Notices Coax groundingAutoDome 7000 Series IP and HD Safety EN en FCC & Ices Information Informations FCC et IcesConnection in Applications Customer Support and ServiceService Centers DisclaimerRepair Center Customer ServiceTechnical Support CanadaParts List, Installation UnpackingTools Required Quantity For Mount Type Supplied by Bosch?AutoDome 7000 Series IP and HDUnpacking en Necessary to install Autodome cameras Barrel connector Roof parapet Mount Pipe MountOnly if installing a fiber optic model Additional Products RequiredSystem overview 4Pre-installation Checklist Roof Mounts 1StabilizationPole and Mast Mounts Extreme Mount ApplicationsFollow these steps Installing the Optional SD CardCard is optional Risk of electrostatic dischargeBosch Security Systems 2013.07 1.2.2 F.01U.283.679 Mount Power Supply Box Wall, Mast Pole, Corner MountsBosch Security Systems 2013.07 1.2.2 F.01U.283.679 Pole Mounts Installing the Pendant Arm Wall, Corner, and MastRoute Wires and Attach Connectors DescriptionPower Supply Box Connections Alarm and relay connectorsGround Screw P101 Connector Power In 120 VAC VACRXD TXD Connector PinSerial Code CODE+ CommunicationsRoute Power through Intermediate Power Supply Box VG4-PSU1 / VG4-PSU23 2 VG4-PA0 Power Supply Box Attach Pendant Arm to Power Supply Box Pendant Arm to Power Box Hinge AlignmentMake Connections in the Power Supply Box Pendant Arm connections to Power Supply BoxFor a Corner installation 6Installing the VGA-PEND-WPLATEFor a Mast or pole installation Ensure that the mounting plate is secure Attach the Pendant Arm to the Mounting PlateRoute and Connect Wires to a Power Supply Box 10 Pendant Arm Cables11 Mounting Plate Inside Detail Attach Pendant to Arm and Tighten Tilt up Dome ConnectorRotate down to engage dome connector Hook and dropBosch Security Systems 2013.07 1.2.2 F.01U.283.679 Installing the Roof Parapet and Pipe Mounts VGA-ROOF-MOUNTVG4-A-PSU1 or VG4-A-PSU2 Power Supply Box VG4-A-PSU1/VG4-A-PSU2 Wiring the Power Supply BoxPipe Interface Board Wiring the Fiber Optic Model Fiber Optic Ethernet Module installed Contro L IN/OUT Attach Cover Door to Power Supply Box Align Cover Door Hinge to Power BoxInstalling the VGA-ROOF-MOUNT VGA-ROOF-MOUNTVGA-ROOF-MOUNT Installing the VG4-A-9543 Pipe Mount Bolt and attach both ends to anchor spots on the roof6Wire the Pipe Interface Board 10 Pipe MountP107 J101 P106 BNCP105 J102 P102 P104 Pipe Interface Module Video Coax J102AWG OUT +Pin Description Alarm Out Normally Open COMInterface Board Retaining Screws Pendant Mounting Screws Connectors for any blocked pin holes and bent pinsAttach Pendant to Pipe and Tighten Recessed hinge pin of the Dome CapTilt Dome 14 Pendant to Roof / Pipe Mount AttachmentConnector P101 on the left side of the box Right side of the boxPrepare Drywall Ceiling for Installation Installing the In-Ceiling MountDimensions Prepare Suspension Ceiling for InstallationTighten the four 4 securing screws to the Bracket Assembly Suspension Ceiling Bracket Top ViewWire the Interface Box Hole which will not be used to route wiresInterface Box Connections Interface Box Connections GND Cations AgndCommuni OUTInstalling the Ceiling IP54 Housing Gasket InstructionsAttach Housing to the Interface Box In-ceiling IP54 Rating Installation Diagram10 Attach Housing to Interface Box Secure Housing to Ceiling 12 Secure camera to ceilingPreparing the Bubble Remove the bubble from an in-ceiling housingRemove the bubble from a pendant housing Remove the foam inserts surrounding the camera moduleReplace the trim ring optional In-ceiling models Pendant Bubble Release OpeningReplace the bubble in an in-ceiling housing Replace the bubble in a pendant housingPower 115/230 VAC Copper Wire To comply with local codes 11.1 Connecting the Autodome camera to the PC11.2 Power Cable and Wire Distances Guides Connection11.3 Ethernet Connections 11.4 Fiber Optic Ethernet Media Converter Optional 11.5 Alarms and Relay Connections AutoDome Programmed N.O.S Configuring a Normally Closed Supervised AlarmContact Alarm Condition Open Closed Normal Short Tamper AutoDome Programmed N.C.SConfiguring a Normally Closed Non-supervised Alarm Configuring Non-supervised Alarms inputs 3 throughConfiguring a Normally Open Non-supervised Alarm AutoDome Programmed N.O11.6 Audio Connections Optional Audio Line Level Input Connections Wire SpecificationsAudio Line Level Output Connections Configuration 12.1 System RequirementsUsing the Configuration Manager 12.2 Configuring the Autodome 7000 Series CameraUsing the Autodome 7000 Series Web Server Network Access About the Settings Basic Mode menuNavigation Starting ConfigurationMaking Changes Enabling Audio Transmission 12.3 Configuring Audio OptionalPre-programmed User Modes Activating Audio ReceptionPassword Configuration via IP, Basic Mode13.1 Basic Mode Device Access Confirm password13.2 Basic Mode Date/Time 13.3 Basic Mode Network13.4 Basic Mode Encoder 13.6 Basic Mode Recording 13.5 Basic Mode Audio13.7 Basic Mode System Overview See also Configuration via IP, Advanced Mode14.1 Advanced Mode General Identification Camera IDDate format PasswordDate/Time Device date/Device timeCamera name stamping 14.5 Display StampingDaylight saving time Time stamping14.6 Advanced Mode Web Interface Appearance 14.8 Livepage Functions Advanced Mode Camera Installer Menu LoggingFactory defaults SC settingsReboot device Max Frame Rate Option Available Streaming OptionsEncoder Profile Advanced ModeCameraEncoder ProfileDSL Profile name Video resolutionExpert Settings Target bit rateEncoder Streams Property Default profileMP SD SD stream options Autodome IP Profiles Autodome HD ProfilesPreview Privacy MasksJpeg stream Camera Settings Fixed Gain Shutter ModeNight mode Maximum Gain LevelLens Settings PTZ Settings Compass DiagnosticsPrepositions and Tours To define and edit an individual sceneMiscellaneous SectorsLogs Audio Advanced Mode RecordingInput volume Pixel CounterStorage Management Recording media Activating and Configuring Storage MediaDevice manager ISCSI MediaFormatting Storage Media Recording ProfilesDeactivating Storage Media Standard recording Maximum Retention Time Recording Scheduler Recording Status Destination password Advanced Mode Alarm Alarm ConnectionsConnect on alarm Number of destination IP addressRemote port Video transmissionStream Video outputAuto-connect Select On to activate audio alarms14.33 VCA VCA ProfilesPreset VCA configurationSelect Off or Test Analysis type Alarm statusAggregation times Motion detector MOTION+ onlyDebounce time 1 s MOTION+ only Select Area MOTION+ only2013.07 1.2.2 F.01U.283.679 Bosch Security Systems Sensitivity Trigger delay sTamper detection Global changeDisappearing edges Virtual MasksReference Check Appearing edgesSelect On if you want the device to generate audio alarms Audio AlarmAudio alarm NameAlarm E-Mail Alarm Task Editor Alarm RulesAlarm Outputs Advanced Mode Interfaces Alarm InputsAdvanced Mode Network Network Access Fill in the 3 fields in this section of the screen Automatic IP assignmentIPv4 IPv6Details Prefix lengthDNS server address 1 / DNS server address TCP rate controlHttps browser port Interface mode ETHHttp browser port RCP+ portProvider Enable DynDNSDynDNS Host nameAdvanced Multicast Quality of serviceUser Mode TCP portImage Posting 14.48 IPv4 Filter AccountsEncryption Advanced Mode Service Maintenance Licenses 192.168.0.10/resetMaintenance log System OverviewOperation 15.1 Using the Autodome CameraSettings, and to configure the network parameters Display StampingProtected Network Maximum Number of ConnectionsProtected AutoDome Image SelectionTriggering Relay Preset ListDigital I/O System LogAudio function Aux Control TabTo Set a Preset Shot To Enter a Keyboard Control CommandTo View a Preset Shot Autopan Livepage Special FunctionsScan FindhomeProcessor Load Image ResolutionSelecting Recordings Controlling Playback Export to FTPBookmarks Guidelines for Implementing Intelligent Tracking 15.2 Using Intelligent TrackingConfiguring Intelligent Tracking Mount/Mounting Surface StabilityUnwanted Motion Using Intelligent TrackingField of View Operation of Intelligent TrackingRecommended Use of Your Camera Guard Tours and Preset ToursContinuous Guard Tours Power-over-Ethernet PoE Preset ToursScene Illumination and Focus Settings Installation in an area with high humiditySD card Outdoor installationUpgrading the AutoDome 800 Series Beginning the Firmware Update Process If O.K., then TroubleshootingProblem Questions to Ask/Actions to Resolve the Problem If camera’s IP address is not set, thenON/OFF Access the Settings Web page for the IP-enabled deviceExpand the Service Settings link, then click Network Contact Bosch Technical SupportCleaning the Bubble Interior MaintenanceBubble Cleaning Bubble HandlingCleaning the Bubble Exterior Remove an SD cardTechnical data User Command Table Some of the following commands may not apply to your cameraAutoDome 7000 Series IP and HDUser Command Table en Index AutoDome 7000 Series IP and HD Index en En Index AutoDome 7000 Series IP and HD AutoDome 7000 Series IP and HD Index en Udpip UDP Page Bosch Security Systems, Inc
Related manuals
Manual 56 pages 38.94 Kb