Panasonic WV-CP470, WV-CP474 operating instructions Preface, Precautions

WV-

CP470

(Lens: Option)

Color CCTV Cameras

Operating Instructions

Model No. WV-CP470

WV-CP474

Before attempting to connect or operate this product,

please read these instructions carefully and save this manual for future use.

				N1101-1121		V8QA5915BN			Printed in Japan
									N 19
										For U.S.A
					NOTE: This equipment has been tested and
					found to comply with the limits for a Class A
					digital device, pursuant to Part 15 of the FCC
			CAUTION
					Rules. These limits are designed to provide
					reasonable protection against harmful interfer-
			RISK OF ELECTRIC
					ence	when the equipment		is	operated in		a
			SHOCK DO NOT OPEN
					commercial environment. This equipment gen-
					erates, uses, and can radiate radio frequency
					energy and, if not installed and used in accor-
	CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,				dance with the instruction manual, may cause
		DO NOT REMOVE COVER (OR BACK).			harmful interference to radio communications.
					Operation of		this equipment in a residential
	NO USER-SERVICEABLE PARTS INSIDE. REFER SER-
					area is likely to cause harmful interference in
	VICING TO QUALIFIED SERVICE PERSONNEL.
					which case the user will be required to correct
					the interference at his own expense.
					FCC	Caution: To assure		continued compli-
			The lightning flash with arrow-
					ance, (example - use only shielded interface
			head symbol, within an equilat-
					cables when		connecting	to		computer	or
			eral triangle, is intended to
					peripheral devices). Any changes or modifica-
			alert the user to the presence
					tions not expressly approved by the party
			of uninsulated "dangerous volt-		responsible for compliance could void the
			age" within the product's enclo-		user’s authority to operate this equipment.
SA 1965			sure that may be of sufficient
			magnitude to constitute a risk
			of electric shock to persons.		The serial number of this product may be found
			The exclamation point within		on the top of the unit.
					You should note the serial number of this unit
			an equilateral triangle is intend-		in the space provided and retain this instruction
			ed to alert the user to the pres-		as a permanent record of your purchase to aid
			ence of important operating		identification in the event of theft.
			and maintenance (servicing)		Model No.
			instructions in the literature
SA 1966			accompanying the appliance.		Serial No.

WARNING:

To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

PREFACE

Panasonic's WV-CP470 (WV-CP474) series color digital camera introduces a new level of high picture quality and high resolution through the use of a 1/3-inch interline transfer CCD image sensor having 771 horizontal pixels (picture elements), and digital signal processing LSIs. This model offers cutting-edge technology for advanced video surveillance.

PRECAUTIONS

1.Do not attempt to disassemble the camera.

To prevent electric shock, do not remove screws or covers.

There are no user-serviceable parts inside. Ask a qualified service personnel for servic- ing.

2.Handle the camera with care.

Do not abuse the camera. Avoid striking, shaking, etc. The camera could be damaged by improper handling or storage.

3.Do not expose the camera to rain or moisture, not try to operate it in wet areas.

If the camera becomes wet, turn the power off immediately and ask qualified service personnel for servicing. Moisture may damage the camera and also cause electric shock.

4.Do not use strong or abrasive detergents when cleaning the camera body.

Use a dry cloth to clean the camera when dirty. When the dirt is hard to remove, use a mild detergent and wipe gently. Then wipe off the remaining detergent with a dry cloth.

5.Clean the CCD faceplate with care.

Do not clean the CCD with strong or abrasive detergents. Use lens tissue or a cotton tipped applicator and ethanol.

6.Never face the camera towards the sun.

Do not aim the camera at bright objects. Whether the camera is in use or not, never aim it at the sun or other extremely bright objects. Otherwise, blooming or smear may be caused.

7.Do not operate the camera beyond the specified temperature, humidity or power source ratings.

Use the camera at temperatures within –10 °C to +50 °C (14 °F - 122 °F), and humidity below 90 %. The input power source is 120 V AC 60 Hz for WV-CP470 and DC 12 V/AC 24 V for WV-CP474.

Caution:

To prevent fire or electric shock hazard, use a UL listed cable (VW-1, style 1007) for the DC 12 V or AC 24 V Input Terminal.