Panasonic WV-CP474, WV-CP470 Specifications, Standard Accessories, Optional Accessories

Page 12

SPECIFICATIONS

Pick-up Device:

771 (H) x 492 (V) pixels, Interline Transfer CCD

Scanning Area:

4.8 (H) x 3.6 (V) mm (Equivalent to scanning area of

 

1/3” pick-up tube)

Scanning:

525 lines/60 fields/30 frames

Horizontal:

15.734 kHz

Vertical:

59.94 Hz

Synchronization:

Internal, Line-locked, External (VS/VBS) or

 

Multiplexed Vertical Drive (VD2) selectable

Video Output:

1.0 V[p-p] NTSC composite 75 /BNC connector

Horizontal Resolution:

480 lines (C/L), 570 lines (B/W)

Signal-to-Noise Ratio:

50 dB (Equivalent to AGC Off, weight On)

Dynamic Range:

46 dB

Minimum Illumination:

0.8 lx (0.08 footcandle) at F1.4 (C/L), 0.1 lx (0.01 foot-

 

candle) at F1.4 (B/W)

Gain Control:

ON (DNR-H), ON (DNR-L) or OFF (SET UP MENU)

 

selectable

White Balance:

ATW1, ATW2 or AWC (SET UP MENU) selectable

Aperture:

Set Variable (SET UP MENU)

Electronic Light Control:

Equivalent to continuous variable shutter speeds

 

between 1/60 s and 1/10 000 s

Super Dynamic2:

ON or OFF (SET UP MENU) selectable

Electronic Shutter Speed:

1/60 (OFF), 1/100, 1/250, 1/500, 1/1 000,1/2 000,

 

1/4 000, 1/10 000 s selectable

Lens Mount:

CS-mount (supplied with C-mount adapter)

ALC Lens:

DC or Video selectable

Ambient Operating Temperature:

–10 °C - +50 °C (14 °F - 122 °F)

Ambient Operating Humidity:

Less than 90 %

Power Source and

WV-CP470: 120 V AC 60 Hz, 4.8 W

Power Consumption:

WV-CP474: 24 V AC 60 Hz, 4.3 W

 

12 V DC, 440 mA

Dimensions (without lens):

70 mm (W) x 55 mm (H) x 118 mm (D)

 

2-5/8” (W) x 2-3/16” (H) x 4-5/8” (D)

Weights (without lens):

WV-CP470: 0.46 kg (1 lbs.) (without power cord)

 

WV-CP474: 0.45 kg (1 lbs.)

Weights and dimensions indicated are approximate.

Specifications are subject to change without notice.

STANDARD ACCESSORIES

Body Cap

1 pc.

ALC Lens Connector (YFE4191J100)

1 pc.

AC Power Cord (only for WV-CP470)

1 pc.

C-mount Adapter

1 pc.

OPTIONAL ACCESSORIES

Lenses : WV-LA2R8C3B, WV-LA4R5C3B, WV-LA9C3B, WV-LA210C3, WV-LA408C3 WV-LA908C3, WV-LZ61/10, WV-LZ61/15, WV-LZA61/2, WV-LZ62/2, WV-LZ62/8, WV-LF4R5C3A, WV-LF9C3A, WV-LZF61/2

Panasonic Security and Digital Imaging Company

A Division of Matsushita Electric Corporation of America

Executive Office: One Panasonic Way 3E-7, Secaucus, New Jersey 07094

Regional Offices:

Northeast: One Panasonic Way, Secaucus, NJ 07094 (201) 348-7303

Southern: 1225 Northbrook Parkway, Suite 1-160, Suwanee, GA 30024 (770) 338-6838

Midwest: 1707 North Randall Road, Elgin, IL 60123 (847) 468-5211

Western: 6550 Katella Ave., Cypress, CA 90630 (714) 373-7840

Panasonic Canada Inc.

5770 Ambler Drive, Mississauga,

Ontario, L4W 2T3 Canada (905)624-5010

Panasonic Sales Company

Division of Matsushita Electric of Puerto Rico Inc.

Ave. 65 de Infanteria. Km. 9.5

San Gabriel Industrial Park, Carolina,

Puerto Rico 00985 (809)750-4300

2001 © Matsushita Communication Industrial Co., Ltd.

Image 12
Contents Precautions PrefaceFeatures Connections WV-CP470 120 V AC 60 HzWV-CP474 12 V DC/24 V AC Mounting LENS/FOCUS Adjustment Installation of CameraMounting from the Top Setup Opening the Setup MenuEditing the CAM SET UP Menu All Reset OperationSetting Procedures Camera Identification Camera ID SettingLight Control Setting ALC/ELC ALC Mode with SUPER-D2 onShutter Speed Setting Shutter Gain Control Setting AGC on DNR-H, DNR-L/OFFALC Mode with SUPER-D2 OFF and ELC Mode Electronic Sensitivity Enhancement Sens UPSynchronization Setting Sync VBS Gen-lock Mode EXT VBSVS Gen-lock Mode EXT VS White Balance Setting White BAL Line-lock Sync Mode LL Auto-Tracing White Balance Mode ATW Motion Detector Setting Motion DET Lens Drive Signal Selection Lens DriveSpecial Menu To reset to the factory settings Camera Reset Burst BWSpecifications Standard AccessoriesOptional Accessories Panasonic Canada Inc