Panasonic WV-BP334, WV-BP332 manual Video Cable

C. WV-BP334 (24V AC 60Hz)

Connect the power cable to the AC24V IN terminal on the rear panel of the WV-BP334.

1 2

24 V AC, 60 Hz

(19.5 V - 28 V)

Recommended wire gauge sizes for 24V AC line

Copper wire		#24	#22	#20	#18
size (AWG)		(0.22mm2)	(0.33mm2)	(0.52mm2)	(0.83mm2)
Length	(m)	95	150	255	425
of Cable
(Approx.)	(ft)	314	495	842	1 403

Caution:

To prevent fire or electric shock hazard, a UL listed wire (VW-1, style 1007) should be used for DC 12V or AC 24V Input Terminals.

Video Cable

1.It is recommended to use a monitor whose resolu- tion is at least equal to that of the camera.

2.Set the termination switch to the 75Ω position on the last monitor.

A.Use a 75Ω coaxial cable.

B.Set the termination switch to the 75Ω posi- tion on the last monitor and to the Hi-Z posi- tion on the other monitors. Do not change the positions after setting.

MonitorMonitor

	VIDEO			VIDEO
IN	OUT	75 ¶	IN	OUT	75 ¶
		Hi-Z			Hi-Z

C. The maximum extensible coaxial cable length between the camera and the monitor is shown below.

-9-