Panasonic WV-BP332, WV-BP334 manual Specifications

Page 18

SPECIFICATIONS

Pick-up Device:

768 (H) x 494 (V) pixels, Interline Transfer CCD

Scanning Area:

4.9 (H) x 3.7 (V) mm (Equivalent to scanning area of 1/3” pick-up tube)

Synchronization:

Internal, External, Line-locked or Multiplexed vertical drive (VD2) selectable

Scanning System:

2 : 1 interlace

 

Scanning:

525 lines / 60 fields / 30 frames

Horizontal:

15.734 kHz

 

Vertical:

59.94 Hz

 

Horizontal Resolution:

570 lines

 

Video Output:

1.0 V[p-p] EIA composite 75 Ω / BNC connector

Signal-to-Noise Ratio:

50 dB (AGC OFF)

 

Electronic Light Control:

Equivalent to continuous variable shutter speed between 1/60 s

 

and 1/10 000 s

 

Minimum Illumination:

0.08 lx (0.008 footcandle) at F1.4, AGC ON

Gain Control:

AGC ON (+18 dB) or OFF selectable

Lens Mount:

C-mount or CS-mount selectable

Ambient Operating Temperature:

10°C - +50°C (14°F - 122°F)

Ambient Operating Humidity:

Less than 90%

 

Power Source and

WV-BP330:

120V AC, 60 Hz, 3.5W

Power Consumption:

WV-BP332:

12V DC, 250 mA

 

WV-BP334:

24V AC, 60 Hz, 3.5W

-16-

Image 18
Contents WV-BP330/WV-BP332/WV-BP334 EnglishFor U.S.A Contents Features PrefaceDo not attempt to disassemble the camera PrecautionsClean the CCD faceplate with care Handle the camera with careMajor Operating Controls and Their Functions WV-BP334Power Cord only WV-BP330 Auto Iris lens ConnectorFlange-back Adjusting Ring Lens option Camera Mounting Screw Hole4Vertical Phase Control Phase only WV-BP330 and WV-BP334 1Back Light Compensation Mode Selector BLC2Lens Drive Signal Selector VIDEO, DC 6Video Output Connector Video OUT7Gen-lock Input Connector GEN-LOCK Connections WV-BP332 12V DCVideo Cable Type RG-59/U RG-6/U RG-11/U RG-15/U Coaxial cable Installation of Auto Iris Lens Connector Mounting the Lens Focus or FLANGE-BACK Adjustment Installation of Camera Mounting from the bottomPrevention of Blooming and Smear Specifications Standard Accessories Video Imaging Systems Company