Panasonic WV-BP332, WV-BP334 manual Installation of Camera, Mounting from the bottom

Page 16

INSTALLATION OF CAMERA

• Mounting from the bottom

This camera is designed to be mounted from the bottom, as shown below. The mounting hole is a standard photographic pan-head screw size (1/4” - 20).

<Mounting at top>

<Mounting at bottom>

• Mounting from the top

Remove the mount adapter from the bottom of the camera by removing the two fixing screws. Attach the mount adapter to the top as shown in the dia- gram, then mount the camera on the mounting bracket.

Make sure that the two original fixing screws are used when mounting the mount adapter as longer length screws may damage inner components.

Fixing Screws

Mount Adapter

-14-

Image 16

Contents WV-BP330/WV-BP332/WV-BP334 EnglishFor U.S.A Contents Features PrefacePrecautions Clean the CCD faceplate with careDo not attempt to disassemble the camera Handle the camera with careMajor Operating Controls and Their Functions WV-BP334Auto Iris lens Connector Flange-back Adjusting RingPower Cord only WV-BP330 Lens option Camera Mounting Screw Hole1Back Light Compensation Mode Selector BLC 2Lens Drive Signal Selector VIDEO, DC4Vertical Phase Control Phase only WV-BP330 and WV-BP334 6Video Output Connector Video OUT7Gen-lock Input Connector GEN-LOCK Connections WV-BP332 12V DCVideo Cable Type RG-59/U RG-6/U RG-11/U RG-15/U Coaxial cable Installation of Auto Iris Lens Connector Mounting the Lens Focus or FLANGE-BACK Adjustment Installation of Camera Mounting from the bottomPrevention of Blooming and Smear Specifications Standard Accessories Video Imaging Systems Company