Axis Communications 207W user manual Technical Specifications, Model

Page 45

AXIS 207W/AXIS 207MW - Technical Specifications 45

Technical Specifications

Item

Specification

 

 

Model

• AXIS 207W: VGA, wired and wireless interface

 

• AXIS 207MW: Megapixel, wired and wireless interface

 

 

Image sensor

• AXIS 207W: ¼” Micron Progressive Scan RGB VGA CMOS

 

• AXIS 207MW: 1/3” 1.3 Megapixel Micron Progressive Scan CMOS

 

 

Lens

• AXIS 207W: 4.0 mm, F2.0, fixed iris, focus range: 0.5 m to infinity

 

• AXIS 207MW: 3.6 mm, F1.8, fixed iris, focus range: 0.5 m to infinity

 

 

Angle of view

• AXIS 207W: Horizontal: 55°

 

• AXIS 207MW: Horizontal: 85°

 

 

Illumination

• AXIS 207W: 1-10000 lux, F2.0

 

• AXIS 207MW: 2-10000 lux, F1.8

 

 

Video compression

• Motion JPEG

 

MPEG-4 Part 2 (ISO/IEC 14496-2) with motion estimation,

 

• Profiles: Simple Profile level 0-3 and Advanced Simple Profile level 0-5

 

 

Resolutions

• AXIS 207W: 7 resolutions up to 640x480

 

• AXIS 207MW: 15 resolutions up to1280x1024

 

 

Frame rates

• AXIS 207W: Up to 30 fps in all resolutions

 

• AXIS 207MW: up to 14 fps in resolutions up to 1280x720, up to 12 fps in 1280x1024

 

 

Video streaming

• Simultaneous Motion JPEG and MPEG-4

 

• Controllable frame rate and bandwidth

 

• 3GPP and ISMA compatible

 

 

Image settings

• Compression levels: 100

 

• Rotation: 0º, 180º

 

• Configurable color level, brightness, contrast, white balance

 

• Overlay capabilities: time, date, text

 

 

Shutter time

• AXIS 207W:1/2-1/10000 sec

 

• AXIS 207MW: 1/10-1/10000 sec

 

 

Audio

Built-in microphone for one-way audio

 

• Audio compression:

 

AAC LC 8-32 kbit/s

 

G.711 PCM 64 kbit/s

 

G.726 ADPCM 32 or 24 kbit/s

 

 

Wireless interface

• IEEE 802.11g 6-54 Mbps

 

• IEEE 802.11b 1-11 Mbps

 

• RF Output power FCC

 

• 802.11b: +20dBm (Peak, without antenna gain)

 

• 802.11g: +22dBm (Peak, without antenna gain)

 

• RF Output power CE (ETSI)

 

• 802.11b: +13dBm ±1dBm (Average, without antenna gain)

 

• 802.11g: +12.5dBm ±1.5dBm (Average, without antenna gain)

 

• Receiver Sensitivity: -90dBm at 1Mb

 

• Channels (US, Canada, Argentina): 11

 

• Channels (Europe, Australia, Korea, Japan): 13

 

• Antenna gain: 1.6dBi (Average) 2.14 dBi (Max)

 

• Infrastructure and ad-hoc modes

 

 

Image 45
Contents Axis 207W / Axis 207MW Network Camera User’s Manual About this Document Contents Axis 207W/207MW Key features Product FeaturesOverview Wireless LED indicatorsAccess from a browser Accessing the CameraSetting the Password Accessing the camera from the Internet3GPP Compatibility Focusing Live ViewTo focus Video recording Setup Live View Config Layout AMC audio controlsVideo Streams How to stream MPEG-4Motion Jpeg MPEG-4 clientsAxis Media Control AMC QuickTime & Real PlayerAlternative methods of accessing the video stream Configuration Accessing the Setup toolsAxis Media Control Video and Image settings Overlay SettingsImage Appearance Advanced MPEG-4 Settings Advanced Camera SettingsAudio Settings Enable audioAudio input Layout Live View ConfigCustomizing the default Upload Own Web FilesOwn Home Default Viewer Default Video FormatAction Buttons Output ButtonsHtml Examples Viewer SettingsEvent Configuration When TriggeredTriggered by Motion Detection Object Size History Sensitivity Port StatusSecurity System OptionsIP Address Filtering ReferralsHttps Date & TimeNetwork Basic TCP/IP Settings Network Interface ModeIP Address Configuration DNS Configuration Network Advanced TCP/IP SettingsNTP Configuration Host Name ConfigurationNAT traversal port mapping for IPv4 HttpNetwork Traffic FTPWireless Status of Wireless NetworksWireless Settings WEP Wired Equivalent Protection WPA-PSK/WPA2-PSK Wi-Fi Protected Access Pre-Shared KeySmtp email QoS Quality of serviceUPnP LED SettingsBonjour Ports & DevicesMaintenance ConfigurationSupport Resetting to the Factory Default Settings Using the Control ButtonAdvanced Function Pin No Specifications I/O Terminal ConnectorTerminal connectors Setup Basic Configuration TroubleshootingChecking the Firmware Upgrading the FirmwareAxis Support Emergency Recovery ProcedureWireless network from a browser Camera is accessible locally, but not externallyBrowser Camera is inaccessible Power indicator is not constantly litUsers Decode only I framesAudio volume too low/high Problems uploading filesIs enabled under System Options Date & Time Poor quality snapshot imagesModel Technical SpecificationsUsers Video management Not includedOptimizing your system General performance considerationsFrame rates Motion Jpeg and MPEG-4 Bandwidth Glossary of Terms Compression See Image Compression VOP See VOP Half-duplex See Full-duplexNtsc National Television System Committee Ntsc is Interactive services such as Internet telephony An I-VOP is complete image frame URL Uniform Resource Locator An address on the networkAxis 207W/AXIS 207MW Glossary of Terms Numerics IndexWPA-PSK

207W specifications

The Axis Communications 207W is a versatile and compact network camera designed to offer high-quality video surveillance along with ease of installation and use. A part of Axis’s extensive range of cameras, the 207W brings features you would expect from a professional-grade security camera while ensuring flexibility for small to medium-sized installations.

One of the standout features of the Axis 207W is its wireless connectivity. This allows users to place the camera in locations where running cables would be challenging or impractical. The camera supports Wi-Fi connectivity, which simplifies the installation process significantly and offers greater freedom in positioning the device for optimal field of view.

Equipped with a 1/4-inch progressive scan CMOS sensor, the Axis 207W captures high-resolution video at a resolution of 640x480 pixels. The camera's frame rate supports up to 30 frames per second in standard quality, ensuring smooth video playback and reliable motion detection. This is particularly beneficial for environments where detail is crucial, such as retail stores and office spaces.

The camera also leverages Axis’s renowned Color and Day/Night technology, allowing it to automatically switch between color mode during the day and black-and-white mode at night. The infrared capability enhances nighttime surveillance, ensuring that users receive clear images even in low-light conditions, significantly improving security around the clock.

In terms of durability, the Axis 207W is designed with a solid construction, making it suitable for both indoor and outdoor deployment. The camera includes a tamper-resistant feature, adding an additional layer of security.

Easy integration is another vital characteristic of the 207W. It supports various streaming protocols, including RTSP and RTP, facilitating seamless integration with existing surveillance systems or third-party applications. This versatility allows for flexible use in different environments without locking users into a specific ecosystem.

The user-friendly interface accompanying the camera enhances its accessibility for users of all experience levels, making it easy to manage and configure settings via a web-based interface. Overall, the Axis Communications 207W stands out as a powerful and flexible solution for those seeking reliable security surveillance technology. With its robust feature set, it caters to a wide range of applications, ensuring peace of mind for users.