Axis Communications 211M user manual Led

Page 7

AXIS 211M - Product Features

External microphone/line in - One 3.5mm input for a mono microphone, or for line in mono signal (only the left channel is used from a stereo signal).

Audio output/line out - Audio output (line level) can be connected to a public address (PA) system or an active speaker with a built-in amplifier. A stereo connector must be used for the audio out.

Power Connector - For connection of the PS-K power adapter (included).

I/O Terminal Connector - The I/O terminal connector provides the physical interface to one transistor output, one digital input and an auxiliary connection point for DC power. For more information, see I/O Terminal Connector, on page 34.

Network connector - The AXIS 211M connects to the network via a standard network cable, and automatically detects the speed of the local network segment (10BaseT/100BaseTX Ethernet). This socket can also be used to power the AXIS 211M via Power over Ethernet (PoE).

Serial Number - This number is used during installation.

Control Button - Press this button to install using the AXIS Internet Dynamic DNS Service as described in the AXIS 211M Installation Guide or to restore the factory default settings, as described on page 33.

LED Indicators - After completion of the startup and self test routines, the multi-colored Network, Status, and Power LED indicators flash as follows:

LED

Color

Description

 

 

 

Network

Green

Steady for connection to 100 Mbit/s network. Flashes for network activity.

 

 

 

 

Amber

Steady for connection to 10 Mbit/s network. Flashes for network activity.

 

 

 

 

Unlit

No connection

 

 

Note: The Network LED can be configured to be unlit during normal operation. See the online help files for more informa-

 

 

tion. Go to Setup > System Options > LED settings.

 

 

 

Status

Green

Shows steady green for normal operation.

 

 

Note: The Status LED can be configured to be unlit during normal operation, or to flash only when the camera is accessed.

 

 

See the online help files for more information. Go to Setup > System Options > LED settings

 

 

 

 

Amber

Steady during startup, reset to factory default or when restoring settings.

 

 

 

 

Red

Slow flash for failed upgrade.

 

 

 

Power

Green

Normal operation.

 

 

 

 

Amber

Flashes green/amber during firmware upgrade.

 

 

 

7

Image 7
Contents Axis 211M About this Document Axis 211M Table of contents Axis 211M Table of contents Key features Product FeaturesDC-Iris control cable Status indicator & MicrophoneTerminal connector OverviewLED Accessing the Axis 211M Using the Network CameraSet the password Accessing the Axis 211M from the InternetLive View AMC audio controls Video Stream How to stream MPEG-4Axis Media Control AMC Alternative methods of accessing the video streamMPEG-4 clients Motion JpegAccessing the Setup tools ConfigurationAxis Media Control Video Stream Video and Image settingsText Overlay Settings Image AppearanceOverlay image requirements Overlay/Mask SettingsAdvanced Camera Settings Overlay/Mask TypeGOV Settings Advanced MPEG-4 SettingsBit Rate Control Audio Input Audio SettingsEnable Audio Audio Channels Audio modeAdvanced Audio Audio OutputCustomize the default Live View ConfigUpload Own Web Files Example Check Show Custom Link Default Video FormatOwn home User Defined LinksExternal Video Sequence ModeDefault Viewer Html ExamplesDefinitions Event ConfigurationConfiguring Event Types Event ServersClick Add triggered on the Event types Audio alarmHow to set up a triggered event Triggered EventMotion Detection Configuration example Click Add scheduled on the Event typesObject Size Port StatusSecurity System OptionsIP Address Filtering Date & Time Authentication process802.1X Network Admission Control Services Network Basic TCP/IP SettingsNetwork Advanced TCP/IP Settings IP Address ConfigurationNAT traversal port mapping NTP ConfigurationHost Name Configuration Link-Local IPv4 AddressNetwork Traffic QoS Quality of ServiceBonjour LED SettingsSmtp email UPnPInformation MaintenanceConfiguration SupportUsing the Reset Button Resetting to the Factory Default SettingsAdvanced Connection diagram Terminal ConnectorFunction Pin number Specifications Upgrading the Firmware TroubleshootingEmergency Recovery Procedure Checking the FirmwareAxis Support Symptoms, Possible Causes and Remedial ActionsVideo/image problems MPEG-4 Video/Image problems generalDecode only I frame Poor quality snapshot images Problems uploading filesBrowser freezes Illumination Technical SpecificationsVideo management Maintenance Video access fromOptimizing your system General performance considerationsEtrax Ethernet Token Ring Axis Axis own microprocessor Glossary of TermsVOP See VOP Axis 211M Glossary of Terms URL Uniform Resource Locator An address on the network SSL/TLS Secure Socket Layer/Transport Layer SecurityAxis 211M Glossary of Terms Axis 211M Index Snmp