Axis Communications 241S, 241Q user manual ARP and Ping in UNIX/Linux

14AXIS 241Q/241S - Installation

ARP and Ping in UNIX/Linux

Assign your product with a unique IP address from a computer on your network, as follows:

1.Acquire an unused IP address for the AXIS 241Q/241S from your network administrator.

2.Connect the AXIS 241Q/241S to the network using a standard network cable.

3.Locate the serial number (S/N) found on the label on the underside of the AXIS 241Q/241S.

Syntax:

arp -s <IP Address> <Serial number> temp ping -s 408 <IP address>

Example:

arp -s 192.168.0.125 00:40:8c:18:10:00 temp ping -s 408 192.168.0.125

4.Start/restart the AXIS 241Q/241S. This must be done no later than 2 minutes after entering the ARP and Ping commands.

5.Close the ARP/Ping session when ‘Reply from 192.168.0.125: ...’ (or similar) is displayed (approximately 10-15 seconds).

6.Start a browser and enter the IP address in the Address/Location field.

7.Press Enter.

8.Enter a password for the root user (administrator).

9.The installation is now complete. Proceed to Using the video server, on page 16.