Axis Communications 210/211 user manual Focusing, Axis

AXIS 210/211 - Accessing the Camera 11

Focusing

To focus the AXIS 210, simply turn the adjustment ring on the lens until the focus is satisfactory.

To focus the AXIS 211, follow the instructions below.

1.From the Basic Configuration page in the setup tools, open the Focus adjustment page.

2.Set the DC-Iris to Disabled and click Save.

3.Unscrew the zoom puller on the lens by turning it anti-clockwise. Adjust the zoom setting as required. Re-tighten the zoom puller.

4.Unscrew the focus puller on the lens. Adjust the focus as required. Re-tighten the focus puller.

Zoom puller	AXIS 211
(Tele/wide)

Focus puller

5. From the Focus adjustment page, set the DC-Iris to Enabled and click Save.

Note: The DC-Iris should always be disabled while focusing the camera. This opens the iris to its maximum, which gives the smallest depth of field and thus the best conditions for correct focusing. When the focus is set with this method it will then be maintained in any light conditions.