Axis Communications 210/211 user manual External Video, Sequence Mode

Page 27

AXIS 210/211 - Live View Config 27

External Video

The camera can also display video images from other Axis network cameras and video servers. These are known as External Video sources. Each external video source is available from the drop-down list on the Live View page.

Click the Add button to open the External Video Source Setup dialog, which is used to make all the necessary settings. Enter the IP address or host name of the external video source you wish to add. The user can then choose to receive either MPEG-2, MPEG-4 or Motion JPEG video stream.

Sequence Mode

The Live View page can be configured to rotate through the internal and selected external video sources, in order, or randomly.

Select the desired video sources and enter the time in seconds to display each source (up to 59 minutes). Click Save.

The Sequence buttons will appear on the Live View page to enable the viewer to start and stop the sequence mode.

Please see the online help for more information.

Image 27

Contents Axis 210/211 Network Camera User’s Manual About this Document Contents Bandwidth Product Features Axis 211 Extra Features Power over Ethernet PoEDC-Iris Axis OverviewNetwork LED IndicatorsAccess From a Browser Accessing the CameraAccessing the cameras from the Internet Setting the PasswordAxis FocusingLive View Axis 210/211 Accessing the Camera Video Streams Stream TypesMotion Jpeg MPEG-4 protocols and communication methods How to stream MPEG-4?Other methods of accessing the video stream Axis Media ControlRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Accessing the Setup tools ConfigurationImage Appearance Video and Image settingsTest Overlay SettingsOverlay Image Settings Video StreamOverlay image limitations Advanced Camera SettingsAdvanced MPEG-4 Settings Overlay image requirementsAxis Media Control Live View Config Customizing the defaultLayout Upload Own Web Files Example Check Show Custom Link User-defined LinksAction Buttons Output ButtonsHtml Examples Default Video Format in Internet Explorer for WindowsAMC Axis Media Control Settings Default Viewer for Motion JpegExternal Video Sequence ModeEvent Configuration Event ServersDefinitions Click Add triggered on the Event types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersMotion Detection History Sensitivity Port StatusSystem Options SecurityIP Address Filter Network Basic TCP/IP Settings IP Address ConfigurationDate & Time Host Name Configuration Network Advanced TCP/IP SettingsServices DNS ConfigurationSmtp email Link-Local AddressNetwork Traffic RTP multicast MPEG-4 LED SettingsMaintenance UPnPSupport ConfigurationResetting to the Factory Default Settings Using the Control ButtonAdvanced Pinout and Interface I/O Terminal ConnectorSchematic Diagram Terminal Connectors Upgrading the Firmware TroubleshootingSetup Basic Configuration Checking the FirmwareAxis Support Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Video/Image problems, general Status and Network indicator LEDs are flashing red rapidly Video compression Technical SpecificationsPower over Ethernet Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Glossary of Terms Switch see below AMC IndexSystem Options Overview