Axis Communications 210/211 user manual Video and Image settings, Image Appearance

Page 19

AXIS 210/211 - Configuration 19

Video and Image settings

The following descriptions offer examples of the features available in the cameras. For details of each setting, please refer to the online help available from the setup tools. Click to access the online help.

Image Appearance

Use these settings to change the image as required.

The configuration of the video image and overlays will affect the camera’s overall performance, depending on how it is used and on the available bandwidth. Lower compression improves video image quality, but increases the bandwidth.

The video image can be rotated and also fine-tuned by adjusting the color level, the brightness and the contrast. Please see the online help for further information on these settings.

Image 19

Contents Axis 210/211 Network Camera User’s Manual About this Document Contents Bandwidth Product Features Power over Ethernet PoE Axis 211 Extra FeaturesDC-Iris Axis OverviewNetwork LED IndicatorsAccess From a Browser Accessing the CameraAccessing the cameras from the Internet Setting the PasswordAxis FocusingLive View Axis 210/211 Accessing the Camera Stream Types Video StreamsMotion Jpeg MPEG-4 protocols and communication methods How to stream MPEG-4?Axis Media Control Other methods of accessing the video streamRTP/RTSP/HTTP or RTP/RTSP/HTTPS Other MPEG-4 clients Accessing the Setup tools ConfigurationImage Appearance Video and Image settingsTest Overlay SettingsOverlay Image Settings Video StreamOverlay image limitations Advanced Camera SettingsAdvanced MPEG-4 Settings Overlay image requirementsAxis Media Control Customizing the default Live View ConfigLayout Upload Own Web Files Example Check Show Custom Link User-defined LinksAction Buttons Output ButtonsHtml Examples Default Video Format in Internet Explorer for WindowsAMC Axis Media Control Settings Default Viewer for Motion JpegExternal Video Sequence ModeEvent Servers Event ConfigurationDefinitions Click Add triggered on the Event types Configuring Event TypesHow to set up a triggered event Triggered EventScheduled Event Pre-trigger and Post-trigger buffersMotion Detection History Sensitivity Port StatusSecurity System OptionsIP Address Filter IP Address Configuration Network Basic TCP/IP SettingsDate & Time Host Name Configuration Network Advanced TCP/IP SettingsServices DNS ConfigurationLink-Local Address Smtp emailNetwork Traffic RTP multicast MPEG-4 LED SettingsMaintenance UPnPSupport ConfigurationUsing the Control Button Resetting to the Factory Default SettingsAdvanced Pinout and Interface I/O Terminal ConnectorSchematic Diagram Terminal Connectors Upgrading the Firmware TroubleshootingSetup Basic Configuration Checking the FirmwareAxis Support Emergency Recovery ProcedureSymptoms, Possible Causes and Remedial Actions Video/Image problems, general Status and Network indicator LEDs are flashing red rapidly Video compression Technical SpecificationsPower over Ethernet Optimizing your system General performance considerationsBandwidth Frame rates Motion Jpeg and MPEG-4Glossary of Terms Switch see below AMC IndexSystem Options Overview