16 |
| Using Your Camera with a Modem | AXIS 2100 User’s Guide |
Connecting Your Computer Using the Null Modem Cable
Important!
•The information and screen examples shown in this section are from Windows NT. Although similar to the
•Windows
Follow the steps below to configure a serial modem connection for your AXIS 2100:
❶ Connect the supplied Null Modem Cable between the COM port on the AXIS 2100 and the serial port on your computer.
❸From the Start menu, open the Control Panel and double click the Modems icon.
❽A Standard 28800 modem connection is now available for the AXIS 2100. Click Finish to close the Install New Modem Wizard.
❷Connect the power supply to the camera and check that the Power Indicator is lit.
❹If a Standard Modem is already set up and displayed in the Modem Properties dialog (see right) you should proceed directly to step 8.
❺Check the box: Don’t detect my
modem, I will select it from a list. Click Next>.
❻ Select the Standard 28800 modem from the displayed list of modems. Click Next>.
❼Select the serial port to which your AXIS 2100 is now connected via the Null Modem cable. Click Next>.
❾Click the Properties button to finally check that the
displayed Communications Port is set correctly; that is, set to the same port as you have connected the AXIS 2100. Click OK.
❿Click Close.