D-Link DCS-6513 user manual Weather Shield Installation

Page 20

Section 2: Assembly and Installation

Weather Shield Installation

The DCS-6513 comes with an optional weather shield to protect your network camera against damage from adverse weather. If you are installing the DCS-6513 in a location where it will be exposed to harsh weather, it is recommended that you install the weather shield.

The weather shield should be installed before you commence mounting or connecting the camera in its final location. To install the weather shield, you will require the 37mm screws which were included in the product package.

Step 1: Using a screwdriver, remove the existing two screws which were pre-installed in the collar of the camera.

Step 2: Place the weather shield over the dome of the camera and align the screw holes with the holes in the collar of the camera.

Step 3: Install the 37mm screws into the existing screw holes so that they hold the weather shield in place.

Install 37mm Screws

Weather Shield

Remove Existing Screws

D-Link DCS-6513 User Manual

20

Image 20
Contents Full HD WDR Day & Night Outdoor Dome Network Camera Preface Manual RevisionsTrademarks Revision Date DescriptionTable of Contents Package Contents Product OverviewIntroduction System RequirementsFeatures Protective Casing Hardware OverviewFront Cable Harness Internal Mounting Concealed Cable InstallationStyle 1 Concealed Cable Installation Assembly and Installation Exposed Cable Installation Style 2 Exposed Cable InstallationAssembly and Installation Assembly and Installation Pendant Mount PlateAssembly and Installation Assembly and Installation Wall Mount Wall Mount BracketDome Camera Weather Shield Installation Install 37mm Screws Weather Shield Remove Existing ScrewsConnection Using 12V DC Power Adapter Connection Using 24V AC Power Wiring Connection with a PoE Switch Adjusting the lens 3-axis Gimbal Adjust the Viewing Angle of the 3-axis MechanismSoftware Installation StepAssembly and Installation Assembly and Installation ViewCam Setup Wizard StepClick Finish to complete the installation Configuration Using the Configuration InterfaceLive Video Record a Video Clip Setup Setup WizardInternet Connection Setup Wizard Enter a name for your camera and click Next to continue Configuration Motion Detection Setup Wizard Configuration Network Setup Configuration Enable CoS Enable QoS Enable IPv6 Dynamic DNS Image Setup Configuration Audio and Video Configuration Focus Control Lens ControlZoom Control Preset Configuration Motion Detection Time and Date Event Setup MediaServerConfiguration Add Server Add Media SNAPSHOTS20080104100341 Add Event Add Recording Size you specify SD Card Advanced Digital Input/OutputICR and IR Https Access List For exampleMaintenance Device ManagementSystem Firmware Upgrade Status Device InfoLogs Help DI/DO Specifications Technical Specifications CameraSystem Dimensions Safety Statements CE Mark WarningFCC Statement FCC CautionRadiation Exposure Statement FCC Radiation Exposure StatementIndustry Canada Notice Contacting Technical Support Phone SupportWarranty Limited WarrantySubmitting a Claim USA Limited Software WarrantyNon-Applicability of Warranty Submitting a Claim Canada What Is Not Covered Disclaimer of Other WarrantiesWhat Is Not Covered FCC Caution Industry Canada Statement Registration