D-Link DCS-6513 user manual Time and Date

Page 51

Section 3: Configuration

Time and Date

This section allows you to automatically or manually configure, update, and maintain the internal system clock for your camera. After making any changes, click the Save Settings button to save your changes.

Time Zone: Select your time zone from the drop-down menu.

Enable Daylight Saving: Select this to enable Daylight Saving Time.

Auto Daylight Saving: Select this option to allow your camera to configure the

Daylight Saving settings automatically.

Set Date and Time Manually: Selecting this option allows you to configure the Daylight

Saving date and time manually.

Offset: Sets the amount of time to be added or removed when

Daylight Saving is enabled.

Synchronize with NTP Server: Enable this feature to obtain time automatically from an

NTP server.

NTP Server: Network Time Protocol (NTP) synchronizes the DCS6513 with an Internet time server. Choose the one that is closest to your location.

Set the Date and Time Manually: This option allows you to set the time and date manually.

Copy Your Computer's Time This will synchronize the time information from your PC.

Settings:

D-Link DCS-6513 User Manual

51

Image 51
Contents Full HD WDR Day & Night Outdoor Dome Network Camera Revision Date Description PrefaceManual Revisions TrademarksTable of Contents Product Overview Package ContentsSystem Requirements IntroductionFeatures Hardware Overview FrontProtective Casing Cable Harness Internal Concealed Cable Installation Style 1 Concealed Cable InstallationMounting Assembly and Installation Style 2 Exposed Cable Installation Exposed Cable InstallationAssembly and Installation Assembly and Installation Plate Pendant MountAssembly and Installation Assembly and Installation Wall Mount Bracket Wall MountDome Camera Install 37mm Screws Weather Shield Remove Existing Screws Weather Shield InstallationConnection Using 12V DC Power Adapter Connection Using 24V AC Power Wiring Connection with a PoE Switch Adjust the Viewing Angle of the 3-axis Mechanism Adjusting the lens 3-axis GimbalStep Software InstallationAssembly and Installation Assembly and Installation Step ViewCam Setup WizardClick Finish to complete the installation Using the Configuration Interface ConfigurationLive Video Record a Video Clip Setup Wizard SetupInternet Connection Setup Wizard Enter a name for your camera and click Next to continue Configuration Motion Detection Setup Wizard Configuration Network Setup Configuration Enable CoS Enable QoS Enable IPv6 Dynamic DNS Image Setup Configuration Audio and Video Configuration Lens Control Zoom ControlFocus Control Preset Configuration Motion Detection Time and Date MediaServer Event SetupConfiguration Add Server Add Media SNAPSHOTS20080104100341 Add Event Add Recording Size you specify SD Card Digital Input/Output AdvancedICR and IR Https For example Access ListDevice Management MaintenanceSystem Firmware Upgrade Device Info StatusLogs Help DI/DO Specifications Camera Technical SpecificationsSystem Dimensions FCC Caution Safety StatementsCE Mark Warning FCC StatementFCC Radiation Exposure Statement Industry Canada NoticeRadiation Exposure Statement Phone Support Contacting Technical SupportLimited Warranty WarrantyLimited Software Warranty Non-Applicability of WarrantySubmitting a Claim USA Submitting a Claim Canada Disclaimer of Other Warranties What Is Not CoveredWhat Is Not Covered FCC Caution Industry Canada Statement Registration