D-Link DCS-3410 manual Power LED, Link LED, DC Power Connector

Section 1 - Product Overview

Hardware Overview

I/O Connector

The DCS-3410 provides a terminal block with three pairs of connectors situated on the back panel. Two pairs are for input and the other is for output. The I/O connectors provide the physical interface to send and receive digital signals to and from a variety of external devices.

Power LED

The power LED is on the back of the camera. As soon as the power adapter is connected to the camera, the LED will turn green. Once a connection has been established via Ethernet port, the LINK LED will turn solid green. If traffic is passing to the camera the LINK LED will blink. If no Ethernet connection is detected the LINK LED will not light up.

Link LED

Once a connection has been established via Ethernet port, the LINK LED will turn solid green. If traffic is passing to the camera the LINK LED will blink. If no Ethernet connection is detected the LINK LED will not light up.

DC Power Connector

The DC power input connector is located on the DCS-3410 Network Camera’s back panel and is labeled 12V DC with a single socket to supply power to the Network Camera.

D-Link DCS-3410 User Manual