Section 3 - Configuration
Recording
In this section, you can configure and schedule the recording setting for your IP camera.
Enable Recording:
Samba Auth:
Select this option to enable the recording feature.
To access your account on the Samba network drive, enter your account or anonymous username and password.
Server:
Shared Folder:
Test:
The name of your Samba server.
The name of the shared folder used for recording.
Click this thumbnail to verify the connection status of your camera to the Samba network drive.
Samba Status: Displays the connection status that is determined by the system. You can click Get Status to refresh the status.
Resolution:
When Storage is full:
Select your
When the recording storage area is full, you may choose to stop recording, or recycle the recording files so that your camera can record the video continuously.
Continuous: Always recording.
Event Based: Records when Motion Recording, Digital Input 1, or Digital Input 2 is triggered.
Prerecord: A preset amount of time before motion recording is triggered.
Postrecord: A preset amount of time after motion recording is triggered.
Continuous: Select this option to manually configure the starting and ending time for the recording.
34 |