Error Messages
Table 6 | Error Messages (continued) |
|
|
|
|
Error Message |
| Corrective Action |
|
| |
The current version of the RAID Firmware is | This message displays when the RAID firmware | |
<number> |
| on the server represents a later release than the |
The RAID Firmware version tested on this system | version that was tested. To continue the | |
is <number> |
| installation, click OK. The installation does not |
| downgrade RAID firmware. | |
|
|
Please note this system has not been tested with the detected RAID Firmware version of <number>
Press 'OK' to continue or 'Cancel' to abort the |
| |
installation |
| |
RAID Firmware Version Warning |
| |
|
| |
The current version of the RAID Firmware is | This message displays when the RAID firmware | |
<number> | on the server represents a different release than | |
The RAID Firmware version tested on this system | the version that was tested. To continue the | |
is <number> | installation, click OK. The installation upgrades | |
or downgrades the RAID firmware to the tested | ||
The RAID Firmware will be automatically | ||
version. | ||
adjusted as part of this installation. |
| |
Press 'OK' to continue or 'Cancel' to abort the |
| |
installation. |
| |
RAID Firmware Version Warning |
| |
|
| |
The current version of the RAID BIOS is | This message displays when the RAID BIOS on | |
<number> | the server represents a different release than the | |
The RAID BIOS version tested on this system is | version that was tested. To continue the | |
installation, click OK. The installation upgrades | ||
<number> | ||
or downgrades the RAID BIOS to the tested | ||
The RAID BIOS will be automatically adjusted as | ||
version. | ||
part of this installation. |
| |
Press 'OK' to continue or 'Cancel' to abort the |
| |
installation. |
| |
RAID BIOS Version Warning |
| |
|
| |
The transfer of the OS image to the hard drive | This message displays when the installation | |
failed! | cannot properly transfer the operating system to | |
This can be caused by scratched or smudged | the hard drive. Verify the condition of the DVD | |
media and attempt the installation again. | ||
system. |
| |
Fatal Error |
| |
|
| |
A failure to program the BIOS was encountered. | This message displays when the installation | |
Error Code: <number> | cannot configure the system BIOS. Verify the | |
health of server, and attempt the installation again. | ||
Fatal Error | ||
|
Installing the Operating System on the Cisco Unified Communications Server, Versions 2000.4.3 and 2000.4.3a
|
| 31 |
|
|
|