Samsung SCC-C6403 instruction manual Preparing the Cables

Page 10

Preparing the Cables

To install and use the SCC-C6403, the following cables should be prepared.

Power Adapter Cable

The cable that plugs into the SCC-C6403 power input receptacle has the rated voltage of AC24V, 1.5A.

Check the rated voltage before using the cable.

Video Cable

The SCC-C6403's cable is a BNC Cable for connecting the video-output terminal to the video-input terminal of the monitor.

Cable Connection

1. First, connect one end of the BNC video cable connector to the Video Output Terminal (VIDEO OUT)

2. Then, connect the other end of

E

the connector to the Video Input

Terminal of the monitor.

 

3. Now connect the Power Adapter Cable. Use a driver to screw one part of the two lines of Power Adapter to Power Input Terminal of the SCC-C6403.

4.Adjust the switch on the Power Adapter to the proper voltage. Then, connect the Power Adapter's plug to the Power Connector.

5.Connect the Remote Control Terminal of the SCC-C6403

and the external Controller.

Controller

Adapter BOARD

2-3

2-4

Image 10
Contents SCC-C6403 Important Safety Instructions FCC Statement Before Usage Chapter Locations of Control Adapter Connection Initial Setting Camera Address SetupBefore Installing Preparing the Cables Ceiling Mount Bracket SBR-100DCM Indoor Housing SHG-120Outdoor Housing SHG-220 Wall Mount Adaptor SADT-100WMCeiling Mount Adaptor SADT-100CM Pole Mount Adaptor SADT-100PMSetup Menu Overv iew Structure of the Setup Menu Sync Camera SET MenuCamera ID COLOR/BW Motion DETDisplay Zoom Digital ZoomZoom Speed Display P/TIris Video SET MenuExit ALCMotion ShutterAGC FlickerlessWhite BAL DISSpecial PresetFocus Mode LevelZone SET Location Zone EnableZone Area Zone ID SETSpeed Auto SETAuto PAN Dwell TimeScan Auto PlayAuto Return Play NumberAlarm SET Other SETSystem Info Short Keys Function KeyProduct specifications