ZONE AREA
Press [ENTER] to enter the ZONE AREA MAP screen from “ZONE AREA SET...”. Select a ZONE AREA number from the ZONE AREA MAP screen and press [ENTER] to enter the ZONE AREA setup screen.
LOCATION
The “LOCATION...” menu designates the left/right LIMIT positions of ZONE AREA. Enter the setup screen to move PAN, then select a start position and press [ENTER]. Move PAN again
to select a end position and press [ENTER]. Now, ZONE AREA setup is complete.
ZONE AREA SET 0
SET START!
(ZONE SET) |
|
ZONE DIR SET | OFF |
ZONE AREA SET | ON... |
EXIT | QUIT |
➜
Press [Enter]
➜
Press [Enter]
ZONE AREA SET | 0 |
LOCATION | ... |
ZONE ID SET | ... |
ZONE ENABLE | ON |
(ZONE AREA MAP)
0 * | 1 | 2 | 3 |
4 | 5 | 6 | 7 |
LOCATION | ... |
ZONE ID SET | ... |
ZONE ENABLE | ON |
EXIT | QUIT |
SET END! |
|
➜
Press [Enter]
After PAN control, press [ENTER] to finish.
➜
After P/R/Z control, press [ENTER]
E
EXITQUIT
ZONE ID SET
This function is used to allocate as many as 12 IDs to each zone area. Use Left , Right, UP, or DOWN for this purpose. You may select the ID position from the additional menu of “LOCATION...”.
ZONE AREA SET 0
LOCATION | ... |
ZONE ID SET | ... |
ZONE ENABLE | ON |
EXIT | QUIT |
➜
Press [Enter]
ZONE AREA ID 0
AB C D E F G H I J K L M N O P Q R S T U V W X Y Z 0 1 2 3 4 5 6 7 8 9
:! - + ✻ ( ) /
SP ï î SP
LOCATION...
RET
ZONE 0........
ZONE ENABLE
This function turns on or off the ZONE AREA ID indication.