Operation
•Run Pattern
Method 1) <Run Pattern> [Pattern NO.] ex) Run Pattern 2 : <Run Pattern> [2] Method 2) <Go Preset> [Pattern NO.+130] ex) Run Pattern 2: <Go Preset> [132]
•Delete Pattern
Use OSD menu to delete a Pattern.
When the pattern is saved or executed, the PAN/TILT is operated with Auto Flip OFF mode.
SCAN
•Function
The Scan function allows running sequence of Presets, Patterns and/or Auto Pans. Max 8 Scan can be stored. Each Scan can have max 20 action entities which can be preset, pattern or Auto Pan. Dwell time means the time interval between actions and is adjustable in the menu. Besides, there is an option number with which Preset speed as well as the repetition number of Pattern and Auto Pan can be set up.
Dwell Time
Preset 1 | Pattern 5 | Auto Pan 5 |
Max 20 entities
•Set Scan
Use OSD Menu to create a Scan .
•Run Scan
Method1) <Run Scan> [Scan No.] ex) Run Scan 2 : <Run Scan> [2]
Method2) <Run Preset> [Scan No.+150] ex) Run Scan 2 : <Run Preset> [152]
•Delete Scan
Use OSD Menu to delete.
SCHEDULE
•Function
The Schedule function allows running an appropriate function like Preset, Auto Pan, Pattern, Scan, Home move at designated day and time. For example, if you setup a rule Tuesday at 9:00AM and Preset 1 (say Main Gate), the camera will move to main gate every
Tuesday at 9:00AM. If you choose Weekday, camera will move to Main gate everyday except weekend.
It is noted that due to the real time clock, the time data will be kept regardless of blackout. The initial time and day setup is essential to proper Schedule function.
•Set Schedule
Use OSD Menu to create a Schedule
•Run Schedule
Use OSD Menu of Schedule Master Enable
•Delete Schedule
Use OSD Menu to delete.
OTHER FUNCTIONS
• Preset Lock |
| |
This function is made to protect preset data from |
| |
unauthorized overwriting. If Preset Lock is ON, |
| |
Preset save command using Hot Key is disabled | ENG | |
while Preset save using OSD Menu is acceptable. | ||
• Power Up Action | ||
| ||
This function enables to resume the last action |
| |
executed before power down. Most of actions such |
| |
as Preset, Pattern, Auto Pan and Scan are available |
| |
for this function but Jog actions are not available to |
| |
resume. |
| |
• Auto Flip |
| |
In case that tilt angle arrives at the top of tilt orbit |
| |
(90°), zoom module camera keep moving to opposite |
| |
tilt direction (180°) to keep tracing targets. As soon |
| |
as zoom module camera passes through the top |
| |
of tilt direction (90°), images should be reversed |
| |
automatically and F appears in screen. If this |
| |
function is set to OFF, tilt movement range is 0 ~ 90°. |
| |
• Parking Action |
| |
This function enables to locate the camera to specifi c |
| |
position automatically if operator doesn’t operate the |
| |
controller for a while. The Park Time can be defi ned |
| |
as an interval from 1 minute to 4 hours. |
| |
• Alarm Input |
| |
2 Alarm Inputs are used. If an external sensor |
| |
is activated, camera can be set to move to |
| |
corresponding preset position. It is noted that the |
| |
latest alarm input is effective if multiple sensors are |
| |
activated. |
|
English – 23