Installation
❖RS-485 Termination Resistor
ON | ON | |
|
|
|
|
|
|
|
|
|
1 2 3 4 5 6 7 8
•Pin 8 is used for ON/OFF of
– Pin 8 RS-485 Termination Resistor (On/Off)
③Placing lower body to Surface Mount bracket. The cable must be properly handled into hole of bracket or side of lower body.
INSTALLATION USING SURFACE
MOUNT ON THE CEILING
❖SCC-C6323
①Setup DIP Switch (see previous page).
④ Make sure stopper pin of bracket pin is located the rightmost side of lower body groove as shown in the picture. Press the dome and turn clockwise till the pin is located leftmost side of groove. Detach protection vinyl from dome cover.
②Screw surface mount bracket to ceiling with 4 screws.
G
14 – 10X MINI SMART DOME CAMERA