Mitsubishi Electronics V31 CHASSIS, V30+, V29 Lenticular Screen and Fresnel Lens Installation

MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927

SERVICING THE LENTICULAR SCREEN AND FRESNEL LENS

Lenticular Screen and Fresnel Lens Installation

Note: Store the Lenticular Screen and Fresnel Lens in a cool dry place. High humidity may deform the Lenticular Screen and Fresnel Lens.

1.Apply double coated tape (Part #LENS-TAPE) along the top rear edge of the Lenticular Screen, as shown below. Refer to the table below for the tape length.

2.Sandwich the Fresnal Lens and Lenticular Screen together. The Lenticular Screen label must be towards the front and the Fresnel Lens label towards the rear. (Figure 2)

3.Apply pressure at the top edge to bond the screens together.

4.Reverse the Screen Removal procedure and insert the screens in the Screen Fame Assembly.

Figure 1

Page 36