Mitsubishi Electronics V29, V30+ WD-52627 / WD-52628 / WD-62627 / WD-62628, SCREEN-ASSY Removal

MODELS: WD-52627 / 52628 / 62627 / 62628 / 62827 / 62927 / 73727 / 73827 / 73927

CABINET FRONT DISASSEMBLY

(WD-52627 / WD-52628 / WD-62627 / WD-62628)

SPEAKER GRILLE & BEZEL Removal

1)Pull the SPEAKER-GRILLE away from the cabinet to remove.

2)Pull the BEZEL from the cabinet.

SCREEN-ASSY Removal

1)Remove 10 screws (a) from the upper cabinet rear cover (3 screws on each side and 4 screws across the top).

2)Remove screws (b) along the bottom of the SCREEN-ASSY (8 screws on 52 inch models, and 10 screws on 62 inch models),

3)Unplug the LL connector to the front CONTROL-PANEL.

4)Lift the SCREEN-ASSY up slightly and then pull away from the cabinet.

CARD READER Removal

1) Remove two screws (c) securing the Card Reader.

2) Pull the Card Reader from the cabinet.

3) Disconnect the ground lead, USB and 1394 connectors to the Card Reader.

Page 7