Mitsubishi Electronics specifications V29 / V30 / V30+ / V31 Chassis, Ntsc/Atsc/Qam, Hdmitm

MITSUBISHIELECTRIC

WD-62827

Pb Solder

Service2005 Manual

DLP PROJECTION HDTV

V29 / V30 / V30+ / V31 CHASSIS

V29 Chassis	V30 Chassis
WD-52627	WD-52628
WD-62627	WD-62628
	WD-73727
V30+ Chassis	V31 Chassis
WD-62827	WD-62927
WD-73827	WD-73927

CAUTION:

Before servicing this chassis, it is important that the service person read the "SAFETY PRECAUTIONS" and "PRODUCT SAFETY NOTICE" contained in this manual.

SPECIFICATIONS

• Power Input	: AC 120V, 60Hz
• Power Usage	: See table on page 5
• Light Engine	: DLPTM (1920 x 1080 pixels)
• Light Source	: 120W [V29,V30(52"&62")]
	: 150W [V30(73"),V30+,V31]
• Channel Range	: Air VHF - 2~13, UHF - 14~69
	Analog Cable - 1~25
	Digital Cable - 1~35
• Antenna Input	: 2 RF 75Ω unbalanced
• Tuning (V29,V30)	: 1 NTSC/ATSC/QAM
	1 Out of Band for CableCARDTM
	1 NTSC for PIP
• Tuning (V30+, V31)	: 2 NTSC/ATSC/QAM
	1 Out of Band for CableCARDTM
	2 NTSC for PIP
• Cabinet Dimensions	: See Table on page 5
• Weight	: See table on page 5

•Speakers (8 Ohms 10W)

:Two 1.5" Round Two 5.5"x2.2" Oval

•Design specifications are subject to change without notice.

•Input Level : VIDEO IN JACK (RCA Type) 1.0Vp-p 75Ω unbalanced

:AUDIO IN JACK (RCA Type) -4.7dBm 43kΩ unbalanced

:S-VIDEO IN JACK

(Y/C separate type)

Y:1.0 Vp-p C:0.286Vp-p(BURST) 75Ω unbalanced

:COMP / Y, Cr, Cb (RCA Type) Y: 1.0 Vp-p Cr, Cb: 700mVp-p

•Output Level : VIDEO OUT JACK (RCA Type) 1.0Vp-p 75Ω unbalanced

:AUDIO OUT JACK (RCAType) -4.7dBm 4.7kΩ unbalanced

• Digital	: IEEE-1394 I/O Jacks
	: Digital Audio Output
		(RCAType)
	: HDMITM
	:	MonitorLinkTM RS-232 Control
	:	Memory Card Reader
Pb Solder	:	Lead-Free solder PWBs

MITSUBISHI DIGITAL ELECTRONICS AMERICA, INC.

9351 Jeronimo Road, Irvine, CA 92618-1904

Copyright © 2005 Mitsubishi Digital Electronics America, Inc.

All Rights Reserved