Samsung SID-500 user manual AGC Auto Gain Control For brighter images, OFF Disabled

Operating Your Camera

AGC (Auto Gain Control): For brighter images.

1.Position the indicator over 'AGC' using the UP or DOWN button.

2.Set 'AGC' to the desired mode using the LEFT or RIGHT button.

•HIGH	: Wide range gain value adjustment
•NORMAL	: Normal range fain value adjustment.
•OFF	: Disabled
	EXPOSURE	SETUP
	BRIGHTNESS	25
	IRIS	AUTO
	SHUTTER	---
	AGC	NORMAL
	SSNR	LOW
	SENS-UP	OFF

SSNR(Samsung Super Noise Reduction): On screen noise reduction.

1.Position the indicator over 'SSNR' using the UP or DOWN button.

2.Set 'SSNR' to the desired mode using the LEFT or RIGHT button.

•LOW	: Low noise reduction
•MIDDLE : Medium noise reduction
•HIGH	: High noise reduction
•OFF	: Disabled

EXPOSURE	SETUP
BRIGHTNESS	25
IRIS	AUTO
SHUTTER	---
AGC	NORMAL
SSNR	LOW
SENS-UP	OFF
COLOR CCD CAMERA 34	User’s Manual

Notes

•Changing 'AGC' setting from NORMAL to HIGH results in greater sensitivity, as well as on screen noise.

•Setting 'AGC' to OFF locks 'SSNR' configuration.

SENS-UP :This feature ensures clear images at night or under low lighting conditions.

1.Position the indicator over 'SENS-UP' using the UP or DOWN button.

2.Set 'SENS-UP' to the desired mode using the LEFT or RIGHT button.

•AUTO : Select this mode for use in night time or under low lighting conditions.

•OFF : Disabled

EXPOSURE	SETUP
BRIGHTNESS	25
IRIS	AUTO
SHUTTER	---
AGC	NORMAL
SSNR	LOW
SENS-UP	OFF
END

Notes

•Once 'AUTO' mode is set, the user can configure Sens-Up limit by increasing /decreasing the shutter speed (e.g.: x2,...,x32, x64,..., x128).

•Enabling Sens-Up increases camera sensitivity and may result in additional noise and/or other phenomenons. This is normal.

COLOR CCD CAMERA 35 User’s Manual