Samsung SID-500 user manual Precautions, Never keep the camera face to strong light directly

Page 5

Precautions

Do not install the camera in extreme temperature conditions.

Do not install or use the camera in an environment where the humidity is high.

Do not drop the camera or subject them to physical shocks.

Never keep the camera face to strong light directly.

Only use the camera under conditions where temperatures are between -10˚C and +50˚C. Be especially careful to provide ventilation when operating under high temperatures.

It can cause the image quality to be poor.

It can cause malfunctions to occur.

It can damage the CCD.

Do not expose the camera to radioactivity.

Do not install the camera under

 

Do not touch the front lens of the

unstable lighting conditions.

 

camera.

Severe lighting change or flicker can

It is one of the most important parts

cause the camera to work improperly.

of the camera. Be careful not to be

 

stained by fingerprint.

COLOR CCD CAMERA 8

User’s Manual

If it is exposed to radioactivity, For heated CCD, it will be out of order.

Notes

If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur.

Please check that the power satisfies the normal specification before connecting the camera.

COLOR CCD CAMERA 9 User’s Manual

Image 5
Contents 10X Zoom SID-500 Series 10x Optical Zoom FeaturesContents Never keep the camera face to strong light directly PrecautionsOverview Installation InstallationSelect either 85X85 or When installing on a adapter plateConnection Connecting to PowerConnection Menu ConfigurationOperating Your Camera RS-485 communication controlSet CAM Title to on using the Left or Right button Menu SetupCAM Title Use the six buttons on back of the cameraCorrecting Mistakes When completed, move the cursor to END and press SET buttonWhite Balance Control Set White BAL using the Left or Right buttonBacklight Three white balance control modes are as followsFocus Motion DetectionOn Any motion in the selected areas is observed Press the SET buttonManual Select Manual and press the SET button ONE Push Focus is automatically adjusted just onceCan be manually adjusted, independent of moving zoom Press the SET button to confirm END To revert to the main setup menuExposure Auto The iris is automatically activated upon illumination Shutter Control image brightness by adjusting shutter speedFLK Ntsc 1/100, PAL 1/120 Flicker-free mode Disabled DisabledOFF Disabled AGC Auto Gain Control For brighter imagesSpecial Preset Save Save configured presetEND Revert to the Special Setup menu Preset Clear Clear configured presetColor Color mode BW mode DAY/NIGHT Select from COLOR, BW or Auto modesTo reset your camera to factory default condition ResetTo finish setup menu ExitSpecifications TroubleshootingCommunication DimensionDeclaration of Conformity