Samsung SID-500 user manual Auto The iris is automatically activated upon illumination

Page 17

Operating Your Camera

IRIS: Set 'IRIS' to 'AUTO' or 'MANUAL'. Position the indicator over 'IRIS' using the UP or DOWN button and then select the desired iris mode using the LEFT or RIGHT button.

EXPOSURE

SETUP

BRIGHTNESS

25

IRIS

AUTO

SHUTTER

---

AGC

NORMAL

•AUTO: The iris is automatically activated upon illumination.

•MANUAL: Manual iris configuration. Set 'IRIS' to 'MANUAL' using the LEFT or RIGHT button and then press the SET button. Increase or decrease iris level using the LEFT or RIGHT button while verifying the changes on screen.

SHUTTER : Control image brightness by adjusting shutter speed.

1.Position the indicator over 'SHUTTER' using the UP or DOWN button. Then select the desired shutter mode (A.FLK, ESC, MANUAL) using the LEFT or RIGHT button.

EXPOSURE SETUP

BRIGHTNESS

25

IRIS

AUTO

SHUTTER

---

AGC

NORMAL

SSNR

LOW

COLOR CCD CAMERA 32

User’s Manual

•A.FLK (NTSC: 1/100, PAL: 1/120): Flicker-free mode

•ESC: Automatic shutter speed setting (optimal)

•MANUAL: Manual shutter speed setting

2.If you choose ‘MANUAL’, select the optimal shutter speed.

·In MANUAL mode, the optimal shutter speed needs to be designated. Select from 1/60 to 1/120,000 (NTSC) or from 1/50 to 1/120,000 (PAL).

*'Sens-Up' mode can be configured manually (2x to 128x).

·Verify changes made to the shutter speed by referencing to changes in on screen brightness.

3. Press the SET button to complete.

Notes

•Image may become unstable if the camera is set to 'ESC' mode and faces a strong fluorescent light.

•Under 'ESC' mode, the brightness can be adjusted using the LEFT or RIGHT button.

•The WDR feature is not available under MANUAL mode.

•Sens-up is disabled under 'MANUAL' or 'A.FLK' mode.

COLOR CCD CAMERA 33 User’s Manual

Page 16 Page 18
Image 17
Page 16 Page 18
Contents 10X Zoom SID-500 Series 10x Optical Zoom FeaturesContents Never keep the camera face to strong light directly PrecautionsOverview Installation InstallationSelect either 85X85 or When installing on a adapter plateConnection Connecting to PowerConnection Menu ConfigurationOperating Your Camera RS-485 communication controlSet CAM Title to on using the Left or Right button Menu SetupCAM Title Use the six buttons on back of the cameraCorrecting Mistakes When completed, move the cursor to END and press SET buttonWhite Balance Control Set White BAL using the Left or Right buttonBacklight Three white balance control modes are as followsFocus Motion DetectionOn Any motion in the selected areas is observed Press the SET buttonManual Select Manual and press the SET button ONE Push Focus is automatically adjusted just onceCan be manually adjusted, independent of moving zoom Press the SET button to confirm END To revert to the main setup menuExposure Auto The iris is automatically activated upon illumination Shutter Control image brightness by adjusting shutter speedFLK Ntsc 1/100, PAL 1/120 Flicker-free mode Disabled DisabledOFF Disabled AGC Auto Gain Control For brighter imagesSpecial Preset Save Save configured presetEND Revert to the Special Setup menu Preset Clear Clear configured presetColor Color mode BW mode DAY/NIGHT Select from COLOR, BW or Auto modesTo reset your camera to factory default condition ResetTo finish setup menu ExitSpecifications TroubleshootingCommunication DimensionDeclaration of Conformity
Top Page Image Contents