Samsung SID-500 Preset Clear Clear configured preset, END Revert to the Special Setup menu

Page 20

Operating Your Camera

•PRESET CLEAR: Clear configured preset.

USER PRESET SETUP

PRESET NO. NO. 1

PRESET MODE OFF

PRESET SAVE

PRESET CLEAR

END

PRESET DEFINED

•END: Revert to the SPECIAL SETUP menu.

USER PRESET SETUP

PRESET NO. NO. 1

PRESET MODE OFF

PRESET SAVE

PRESET CLEAR

END

PRESET DEFINED

PRIVACY: Mask privacy area using this feature. The mask area expand/contract upon the zoom position.

SPECIAL SETUP

USER

PRESET

OFF

PRIVACY

OFF

DAY/NIGHT

COLOR

SYNC

 

INT

COMM

ADJ

 

COLOR CCD CAMERA 38 User’s Manual

•GROUP SEL : Choose up to eight groups. Each group can consist of four mask areas.

•AREA SEL : Configure eight mask areas.

•AREA MODE : Mask area display.

MASK TONE : Adjust desired mask color level.

•TOP

: To move the mask area up.

•BOTTOM

: To move the mask area down.

•LEFT

: To move the mask area left.

•RIGHT

: To move the mask area right.

DAY/NIGHT: Select from COLOR, BW or AUTO modes.

SPECIAL

SETUP

USER

PRESET

OFF

PRIVACY

OFF

DAY/NIGHT

COLOR

SYNC

 

INT

COMM

ADJ

 

IMAGE

ADJ

 

END

 

 

•COLOR : Color mode.

B/W : BW mode.

•AUTO1, 2 : The camera automatically detects lighting conditions and selects the mode accordingly. Auto 1 mode is switched to IR Cut Filter more lightning conditions than Auto 2.

Notes

• When selecting AUTO2 mode, the AGC is fixed at HIGH mode.

COLOR CCD CAMERA 39 User’s Manual

Image 20
Contents 10X Zoom SID-500 Series Features 10x Optical ZoomContents Precautions Never keep the camera face to strong light directlyOverview Installation InstallationWhen installing on a adapter plate Select either 85X85 orConnecting to Power ConnectionMenu Configuration ConnectionOperating Your Camera RS-485 communication controlMenu Setup Set CAM Title to on using the Left or Right buttonCAM Title Use the six buttons on back of the cameraWhen completed, move the cursor to END and press SET button Correcting MistakesSet White BAL using the Left or Right button White Balance ControlBacklight Three white balance control modes are as followsMotion Detection FocusOn Any motion in the selected areas is observed Press the SET buttonManual Select Manual and press the SET button ONE Push Focus is automatically adjusted just onceCan be manually adjusted, independent of moving zoom Press the SET button to confirm END To revert to the main setup menuExposure Auto The iris is automatically activated upon illumination Shutter Control image brightness by adjusting shutter speedFLK Ntsc 1/100, PAL 1/120 Flicker-free mode Disabled DisabledOFF Disabled AGC Auto Gain Control For brighter imagesPreset Save Save configured preset SpecialPreset Clear Clear configured preset END Revert to the Special Setup menuColor Color mode BW mode DAY/NIGHT Select from COLOR, BW or Auto modesReset To reset your camera to factory default conditionTo finish setup menu ExitTroubleshooting SpecificationsDimension CommunicationDeclaration of Conformity