Audiovox VC-600 VE-XXX in which case the white DC, Best reception, 2451MHz 2470 MHz, 280 mA

	· Find a suitable location for the receiver.				VE-XXX in which case the white DC
	· Plug the RCA cable into the A/V outputs				Power cable is not used.
		(yellow to video out and white to audio out).		7. Channel Selection
	· Plug the other end of the RCA cable into the
				After connecting and turning on the equipment,
		A/V inputs of the TV monitor to be used.
				select the channel that gives the best reception
	· If using this receiver with any Audiovox
				and least interference. The channel number
		VE-XXX series product, plug the white dc
				must match the channel number of the camera.
		power cable into the receiver and plug the other
				The antenna is normally positioned vertically
		end with the center pin plug into the VE-XXX.
				but its position may be changed to obtain the
	· Use AC-DC adapter if not connecting to
				best reception.
8.
S		CHANNEL	CH1		CH2	CH3	CH4
p
e		FREQUENCY	2413 MHz		2432 MHz	2451MHz	2470 MHz
c
		IMPEDANCE	50 ohms typical
i
f		P O W E R	12 VDC supplied by AC/DC adapter
i		CURRENT	280 mA
c		VIDEO OUTPUT	1Vp-p composite video (75 ohms)
a
t		AUDIO OUTPUT	2Vp-p max
i		DIMENSIONS	L: 115mm	H: 23mm D: 80mm
o
n		OPERATING TEMPERATURE	-10° C to +50° C
s

NOTICE: Due to the nature of RF (Radio Frequency) signals, interference m ay occur fro m other devices that generate radio frequencies (such as microwave ovens, cordless phones and portable radio transceivers) when they are operated in the vicinity of this camera and receiver. M oving the camera and/or receiver farther awayfrom these types of devices may eliminate interference. Occasional interference is normal and does not indicate a defective product.

© 2000 Audiovox Corporation, Hauppauge, NY 11788 128-5680

128-5680

4 of 4