Samsung SID-452 instruction manual Features, Built-in Auto Iris Vari-Focal Lens

Features

Built-in Auto Iris Vari-Focal Lens.

The focal length of lens is 3 to 9 mm(F 1.2), Equivalent to 3X zoom. The built-in lens allow the camera to have wider dynamic range, therefore you can use in various applications.

Horizontal Resolution 530 TV Lines

Clear image quality has been achieved by employing a CCD with 410,000 pixel(NTSC), 470,000 pixel(PAL), which provides a horizontal resolution of 530 TV lines.

Electronic DAY & NIGHT

This camera has a function that electronically selects the mode that is appropriate for daytime or night-time conditions. The COLOR mode operates in daytime conditions to provide optimum colors, and BW mode operates in night-time conditions to enhance the definition of the image.

High Sensitivity

The built-in high sensitivity COLOR CCD enables a clear image even in 0.002Lux (Sens-Up) illumination.

SSNR (Samsung Super Noise Reduction)

By using built-in SSNR function manufactured by SAMSUNG TECHWIN, the amount of low illuminance noise has been significantly reduced, and the signal-to-noise ratio (S/N) as well as horizontal resolution have been improved, resulting in a clear and sharp image display even in the dark.

Controlled by OSD Menu

The camera can be controlled by selecting text displayed on the monitor screen.

Warning

The camera needs periodic inspection.

Contact an authorized technician for inspection.

Stop using your camera when you find a malfunction.

If you use your camera around smoke or unusual heat for a long time, a fire may be caused.

Do not Install the camera on a surface that can not support it.

Unless the surface is suitable, it could cause falling or other hazards.

Do not handle the camera with wet hands

It could cause an electric shock.

PRIVACY Function

The PRIVACY function conceals the areas you do not wish to appear on the screen.

Sub Monitor Function

The sub monitor function enables easy adjustment of the camera angle within the monitoring range during its installation.

Do not disassemble the camera.

It may result in fire, electric shock or other hazards.

IP66 Approved/ Dust and Rain
Resistant	Additional Functions
With dust and rain resistant design, the	SENS-UP, MOTION DETECTION, MIRROR,
camera can be installed outside under building
eaves or places thatare exposed to the dust	SHARPNESS and SYNC(INT/LL) functions
and rain.	are also available.
COLOR DOME CAMERA 6	User’s Manual

Do not use the camera close to a gas or oil leak.

It may result in fire or other hazards.

COLOR DOME CAMERA 7 User’s Manual