Camera Operation
Notes
•If AGC is OFF, you can’t select AUTO mode.
•When an infrared light is used, there may be a problem with focusing and COLOR (DAY & NIGHT).
SYNC : Two SYNCHRONIZATION modes are available INTERNAL and EXTERNAL
Models).
- INT : Internal synchronization
-LL : External
•If you choose ‘LL’, you can adjust the desired phase. Press the SET button.
•You can adjust the desired phase from 0 to 359.
Notes
•When the power frequency is 50Hz, you can not use
•When the power frequency is 60Hz, you can not use the
•‘Sync.’ mode is fixed to ‘INT’ in DC 12V input power.
MOTION DETECTION:
This product has a feature that allows you to observe movements of objects in 4 different areas on the screen, and the words 'MOTION DETECTED' appear on the screen when movement is detected; hence a single individual can conduct supervision efficiently. The camera detects an object's movement by sensing disparity of outline, and level of brightness and color.
•Please press the SETUP button.
-OFF : MOTION DETECTION mode is cancelled.
-ON : Any motion in the selected areas is observed.
COLOR DOME CAMERA 32 User’s Manual
•Please select the area you wish to observe from the 4 areas in AREA SEL mode.
•Please select ON mode for the chosen area.
•Please adjust the size of the area to be observed by using the UP, DOWN, LEFT or RIGHT button.
•Please press the SETUP button to save the changes and complete the setting.
Notes
•There is no ‘MD’ output signal. ‘MD’ is on screen display only words.
PRIVACY: This modes conceals the areas you do not wish to appear on the screen.
-OFF : Cancels the PRIVACY mode.
-ON : Operates the PRIVACY mode. •Please press the SETUP button.
•Please select the area you do not wish to appear from the 4 areas in AREA SEL mode. •Please select ON mode for the chosen area.
•Please adjust the size of the area to be concealed by using the UP, DOWN, LEFT or RIGHT button.
COLOR DOME CAMERA 33 User’s Manual