Operating Your Camera
1.Press the Function Setup Switch to access the main setup menu and then position the indicator over 'SPECIAL' by moving the up or down direction of the Function Setup Switch.
- AUTO : The mode is switched to 'Color' in a normal |
environment, but switches to 'B/W' mode |
AUTO SETUP
IR MODE | MANUAL |
2.Press the Function Setup Switch to confirm.
PRIVACY : Hide an area you want to hide on the screen.
SPECIAL SETUP
PRIVACYON
DAY/NIGHT AUTO
When the SPECIAL menu screen is displayed, by moving the up or down direction of the Function Setup
Switch so that the arrow indicates ‘PRIVACY’.
Set up the mode using the 4 direction buttons.
PRIVACY SETUP
▶ AREA SEL |
|
| AREA1 | |||
| AREA MODE |
|
| ON | ||
| MASK COLOR | GRAY | ||||
| TOP | 39 | ||||
| BOTTOM | 79 | ||||
| LEFT |
|
| 14 | ||
| RIGHT |
|
| 53 | ||
| RETURN |
|
|
|
| |
|
|
|
|
|
|
|
when ambient illumination is low. To set up |
the switching time or speed for AUTO mode, |
press the Function Setup Switch. |
· IR MODE AUTO : The IR LED is controlled automatically |
according to brightness of object |
which is situated on screen center. |
· MANUAL : You can control WIDE LED and NARROW |
LED step from 0 to 32. |
· OFF : Disabled. |
*LED ON : Only B/W mode.
-COLOR : The picture is always displayed in color.
-B/W : The picture is always displayed in black and white.
▶ COLOR→B/W | - |
DWELL TIME | 5 SEC |
DURATION | SLOW |
B/W→COLOR | - |
DWELL TIME | 5 SEC |
DURATION | SLOW |
RETURN |
|
IR LEVEL SETUP
▶WIDE 
32
NARROW 
32 RETURN 
BURST LEVEL SETUP
▶BURST LEVEL 50
RETURN 
-AREA SEL : You can select up to 12 MD areas.
-AREA MODE : Determines whether to use the area selected in the AREA SEL.
-MASK COLOR : Determine area color. You can select Green, Red, Blue, Black, White,
Gray.
DAY/NIGHT : You can display pictures in color or black and white.
SPECIAL SETUP |
|
PRIVACY | OFF |
DAY/NIGHT | AUTO |
DIS | OFF |
When the SETUP menu screen is displayed, select ‘DAY/NIGHT’ by moving the up or down direction of the Function Setup Switch so that the arrow indicates 'DAY/NIGHT'.
Select a desired mode by moving the left or right direction of the Function Setup Switch according to the picture display you want.
|
|
|
|
|
|
|
|
|
| BURST MODE SETUP |
|
|
| IR LEVEL SETUP |
|
| |
| ▶BURST MODE | ON |
|
|
| ▶WIDE | 32 |
|
| IR MODE | MANUAL |
|
|
| NARROW | 32 |
|
| RETURN |
|
|
|
| RETURN |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
•DWELL TIME : You can select tday/night switching delay time from.
→5,7,10,15,20,30,40, 60(sec)
•DURATION : You can select the day/night switching point(lux).
| Color → B/W | B/W → Color |
Fast | 0.7lux | 5lux |
Slow | 1lux | 3lux |
※When AGC is middle mode.
COLOR CCD CAMERA 32 User Guide | COLOR CCD CAMERA 33 User Guide |