Operating Your Camera
Notes
•Image may become unstable if the camera is set to 'ESC' mode and faces a strong fluorescent light.
•Under 'ESC' mode, the brightness can be adjusted by moving the left or right direction of the Function Setup Switch.
Notes
•Changing the 'AGC' setting from LOW to HIGH results in greater sensitivity, as well as on screen noise.
•Setting 'AGC' to OFF locks 'SSNR3' configuration.
AGC (Auto Gain Control) : For brighter images.
Position the indicator over 'AGC' by moving the up or down direction of the Function
Setup Switch.
Set 'AGC' to the desired mode by moving the left or right direction of the Function
Setup Switch.
Position the indicator over |
or down direction of the Function Setup Switch. |
Set |
or right direction of the Function Setup Switch. |
- AUTO : Select this mode for use in night time or under |
▶LIMIT | X2 |
RETURN |
|
-HIGH : Wide range gain value adjustment
-MANUAL : Selecting gain value range. (5dB ~ 41dB)
-OFF : Disabled
-LOW : Narrow range gain value adjustment
-MEDIUM : MEDIUM range gain value adjustment
EXPOSURE SETUP
BRIGHTNESS 50
IRIS | AUTO |
SHUTTER | |
AGC | HIGH |
SSNR3 | ON |
GAIN MANUAL SETUP
▶AGC VAL | 5dB |
RETURN |
|
low light conditions. |
- OFF : Disabled |
Notes
•Once 'AUTO' mode is set, the user can configure the
•Enabling
SPECIAL
SSNR3(Samsung Super Noise Reduction) : On screen noise reduction.
Position the indicator over 'SSNR3' by moving the up or down direction of the Function Setup Switch.
Set 'SSNR3' to the desired mode by moving the left or
right direction of the Function Setup Switch. | SSNR3 LEVEL SETUP | |
- OFF : Disabled | ▶LEVEL | 12 |
| RETURN |
|
|
|
|
MAIN | SETUP |
SSDR | ON |
WHITE BAL | ATW |
BACKLIGHT | OFF |
MOTION DET | OFF |
FOCUS |
|
EXPOSURE |
|
SPECIAL |
|
RESET |
|
COLOR CCD CAMERA 30 User Guide | COLOR CCD CAMERA 31 User Guide |