Samsung SCO-2120R Special Setup Privacy, Sync, Pelco-D/Pelco-P/Bosch/Honeywell/Vicon/Ad/Panasonic

Page 18

Operating Your Camera

Notes

• When using a Video Auto Iris Lens, if you set the lens level to low, automatic switching

between Color and Black & White may not occur.

• You cannot control the DAY/NIGHT menu when AGC in the EXPOSURE menu is ‘OFF’.

At this time, the exchange between DAY mode and NIGHT mode operates as like

selecting ‘COLOR’ mode.

• The OSD key does not work for 3 seconds when switching to Color or B/W, to ensure

stable camera operation.

• The camera may focus less well under infrared illumination than under normal

illumination.

• Since the camera may not focus as well under infrared illumination at night as it does

under normal illumination, install an Extra-low Dispersion Lens to obtain sharp

pictures.

• The brightness of illumination is changeable by installed environment.

INT : Internal synchronization

LL : External line-lock synchronization

·If you choose 'LL', you can adjust the desired phase. Press the SET button.

·You can adjust the desired phase from 0 to 359.

COMM ADJ (Communication Adjustment) :

This function sets up the camera communication status when controlling the camera through an external controlled device.

When the SPECIAL menu screen is displayed, by moving the up or down direction of the Function Setup Switch so that the arrow indicates ‘COMM ADJ’.

COMMUNICATION SETUP

PROTOCOL SAMSUNG-T

CAM ID

1

BAUD RATE

9600

UART MODE

8-N-1

RET PKT

DISABLE

RETURN

 

DIS : The DIS mode can compensate for vibration of the camera.

SPECIAL SETUP

 

PRIVACY

OFF

DAY/NIGHT

AUTO

DIS

OFF

Notes

• When DIS is operating, D-ZOOM does not operate.

SYNC : Two synchronization modes are available INTERNAL and EXTERNAL LINE-LOCK. In LINE-LOCK mode, it synchronizes the camera's video out signal to the external SYNC signal.

SPECIAL SETUP

PRIVACY

OFF

DAY/NIGHT

COLOR

DIS

OFF

SYNC

INT

Set up the mode moving the 4 direction of Function Setup Switch.

-CAM ID : Determines the camera's identification number (between 0 and 255).

-Protocol : Select the communication PROTOCOL. (SAMSUNG-T/SAMSUNG-E,

PELCO-D/PELCO-P/BOSCH/HONEYWELL/VICON/AD/PANASONIC)

-BAUD RATE : You can select 2400/4800/9600/19200/38400/57600 bps.

-UART MODE : You can select NONE, EVEN or ODD for the parity bits.

COLOR CCD CAMERA 34 User Guide

COLOR CCD CAMERA 35 User Guide

Image 18
Contents English Model Description Risk of electric shock to personsContents FeaturesPrecautions Temperature conditions EnvironmentComponents and Accessories OverviewFront Back SideWhen the resistance value of copper wire is at 20C68F Connecting to MonitorConnecting to Power ConnectionControl Cable Using Coaxial CommunicationsEnable RET PKTMenu Configuration Operating Your CameraWhite Balance White Bal BacklightSsdr White BAL ATW Motion Detection Mask tone areaMotion DET Senstivity Focus When the DIS is enabled, you cannot use the D-ZOOM Focus Setup Mode AutoMode Auto Zoom Track Zoom Speed FastDAY Fast Zoom OFF Zoom POS InitOFF Lens Init Exposure Focus Exposure Special Reset SpecialIris Auto Shutter AGC High SSNR3 Special Setup Privacyon DAY/NIGHT Auto Special Setup Privacy SyncPELCO-D/PELCO-P/BOSCH/HONEYWELL/VICON/AD/PANASONIC Comm ADJ Image ADJ Monitor ScreenDisplay Return CAM Title Troubleshooting ResetExit Specifications SCO-2120RN SCO-2120RPDimension Declaration of ConformityMemo Sales Network