Samsung SCO-2120R manual Model Description, Risk of electric shock to persons

Page 2

Before operating the camera, confirm the camera model and correct input power voltage. In order to that you can understand this manual thoroughly, we will explain the model description.

nSCO-2120R SERIES

• NTSC MODEL

• PAL MODEL

SCO-2120RN

SCO-2120RP

n MODEL DESCRIPTION

SCO-2120R X

_

SIGNAL SYSTEM

SIGNAL SYSTEM N → NTSC MODEL P → PAL MODEL

The lightning flash with an arrowhead symbol, within an equilateral triangle is

intended to alert the user to the presence of uninsulated “dangerous voltage”

within the product's enclosure that may be of sufficient magnitude to constitute

a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user

to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

INFORMATION-This equipment has been tested and found to comply with limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

WARNING -Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.

WARNING -To prevent electric shock and risk of fire hazards:

Do NOT use power sources other than that specified.

Do NOT expose this appliance to rain or moisture.

This installation should be made by a qualified service person and

should conform to all local codes.

Image 2
Contents English Model Description Risk of electric shock to personsContents FeaturesPrecautions Temperature conditions EnvironmentFront Components and AccessoriesOverview Back SideWhen the resistance value of copper wire is at 20C68F Connecting to MonitorConnecting to Power ConnectionControl Cable Using Coaxial CommunicationsEnable RET PKTMenu Configuration Operating Your CameraSsdr White BAL ATW White Balance White BalBacklight Motion DET Senstivity Motion DetectionMask tone area Focus When the DIS is enabled, you cannot use the D-ZOOM Focus Setup Mode AutoMode Auto Zoom Track Zoom Speed FastOFF Lens Init DAYFast Zoom OFF Zoom POS Init Exposure Iris Auto Shutter AGC High SSNR3 Focus Exposure Special ResetSpecial Special Setup Privacyon DAY/NIGHT Auto PELCO-D/PELCO-P/BOSCH/HONEYWELL/VICON/AD/PANASONIC Special Setup PrivacySync Comm ADJ Image ADJ Monitor ScreenDisplay Return CAM Title Exit TroubleshootingReset Specifications SCO-2120RN SCO-2120RPDimension Declaration of ConformityMemo Sales Network